Selecting A Supported Display Mode - Lenovo ThinkCentre TIO22Gen3 User Manual

Selecting a supported display mode

The display mode that monitor uses is controlled by the computer. Therefore, refer to your computer
documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes. This is normal and the
image can be readjusted using automatic image setup and the image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel
technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently configured
to a display mode outside the range of this monitor, you may need to re-attach the CRT monitor
temporarily until you have re-configured the system; preferably to 1920x1080 at 60Hz, which
is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-2. Factory set display modes
Addressability
640x350
640x480
720x400
800x600
1024x768
1152x864
1280x768
1280x800
1280x1024
1366x768
1440x900
1600x1200
1680x1050
1920x1080
Refresh rate
70 Hz
60Hz, 66Hz, 72Hz, 75Hz
70 Hz
60Hz, 72Hz, 75Hz
60Hz, 70Hz, 75Hz
75 Hz
60 Hz
60 Hz
60Hz, 72Hz, 75Hz
60 Hz
60Hz, 75Hz
60Hz, 70Hz, 75Hz
60 Hz
60Hz
2-13
Chapter 2.