Do you have a question about the Impulse 8060 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Holux Impulse 8060
Page 1
Heart-Rate Smartband Impulse 8060 User Manual V1.0...
Page 3
If you feel uncomfortable during the exercise, stop and seek medical advice immediately. The user must use the device carefully and it is up to the user rather than HOLUX to take all safety responsibilities. ...
Page 4
HOLUX Heart-Rate Smartband Impulse 8060 waterproof function; - Do not rinse the device directly under a faucet to avoid affecting or damaging the waterproof function. Do not remove or replace the battery. Only well trained service personnel are allowed to disassemble/install the internal components.
Page 5
HOLUX, or repairs done by anyone other than HOLUX and authorized retail/service providers. 2. Expendable parts are not covered in the warranty.
Page 6
HOLUX Heart-Rate Smartband Impulse 8060 4. The content of this user manual is subject to change without prior notice. Please contact us if you have any question or notice any errors in descriptions in the user manual.
Page 7
HOLUX Heart-Rate Smartband Impulse 8060 Copyright Information No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any mean, without the express written permission of Holux Technology, Inc.
Page 8
HOLUX Heart-Rate Smartband Impulse 8060 Federal Communications Commission (FCC) Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 9
HOLUX Heart-Rate Smartband Impulse 8060 CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning: The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.
Accessories ..............12 Charging the Battery ............ 13 Wear the Smartband ............ 15 Maintenance of the product .......... 15 How to use Impulse 8060 .......... 16 Menu function ............. 17 Main screen ............. 17 Legends..............23 APP Installation ............24 Normal Care and Maintenance ........
Product Introduction Thank you for purchasing HOLUX Heart-Rate Smartband Impulse 8060. Impulse 8060 is a smartband designed for people who are in pursuit of a healthy lifestyle and convenience in exercising. It has the most advanced integrated physical monitoring technology and can accurately measure the heart-rate for long periods continuously so that users can monitor their heart and lung functions and exercise effectiveness.
Enable/ disable function: In Heart-rate Function Switch function page, Touch and hold the key for 3 seconds to Enable/ disable the Heart-rate. If the Impulse 8060 cannot operate normally, please run out the battery, then charging it to reset the system.
HOLUX Heart-Rate Smartband Impulse 8060 Accessories Check the box for the following supplied accessories. If any is missing, contact your supplier immediately. Impulse 8060 Quick Guide...
HOLUX Heart-Rate Smartband Impulse 8060 Charging the Battery Before using your Impulse 8060 for the first time, you need to charge it for approximately 2 hours. As following figure, takes off the Impulse 8060’s watchstrap , then using the USB adapter or connect to the USB port of the PC for charging.
Page 16
Using the USB adapter (Optional) Connect the Impulse 8060’s USB plug cradle to the optional USB adapter, then insert the USB adapter into a power outlet. Connecting to a PC Insert Impulse 8060’s USB plug into a free USB port on your PC.
Wrist bone Maintenance of the product You can use a damp cloth to wipe the Impulse 8060 or use gentle soap solution to remove oil or dirt. Use a wet cotton swab to clean the area around the sensor.
Make sure the battery is fully charged (charging time: about 2 hours) before using Impulse 8060 to ensure normal operation of the system. When using the Impulse 8060 for the first time, long press the [Function Switch Key] for 6 seconds to enable Impulse 8060.
HOLUX Heart-Rate Smartband Impulse 8060 Menu function The time page appears once you start to use the Impulse 8060. Touch the [Function Switch touch Key] to switch function pages. The following table lists the available functions. Main screen Time Function: Display current time.
Page 20
Power level 10~35%; Power level <10%; a low power message appears. Step Function: Calculate and record the number of steps users have walked. ※ Impulse 8060 lets you know when you reach your goals. Calorie Calculation : calculate and display calorie consumption.
Page 21
HOLUX Heart-Rate Smartband Impulse 8060 ※ Impulse 8060 lets you know when you reach your goals. Heart-rate Measurement: Perform continuous and long term heart-rate measurement. ※ Enable/ Disable Heart-rate Measurement: In the heart-rate measurement function page, touch and hold the...
Page 22
A big and small heart symbol (beating continuously) will be displayed on the screen. When Impulse 8060 detects heart-rate status, Impulse 8060 will vibrate for 3 seconds. The screen will also display the number and zone of heart-rate. →...
Page 23
※ If the heart-rate value is not displayed after 2 minutes of detection, Impulse 8060 will disable detection automatically. Please verify the position where Impulse 8060 is worn and perform the measurement again. Then, wait until Impulse 8060 detects the heartbeat before starting normal activities.
Page 24
HOLUX Heart-Rate Smartband Impulse 8060 Unread Messages prompt on mobile phone. Missed Calls prompt on mobile phone Bluetooth connection and battery status: Display the Bluetooth connection and power status. ※ When pairing with Bluetooth, the screen will display a link symbol.
APP and memory usage is less than 90%. ※ When the memory capacity has been reached, Impulse 8060 will continue to record (the step and heart-rate value) and overwrite the oldest information on the memory.
Page 26
HOLUX Heart-Rate Smartband Impulse 8060 Update FW The page will close automatically after the FW update is finished.
HOLUX Heart-Rate Smartband Impulse 8060 APP Installation Using the Bluetooth connection, this device can be used with the Impulse APP installed on your smartphone. The Impulse APP can be used to display related activity and training records. Step 1: On your smartphone, go to the Google Play Store, search for the “Impulse”...
Page 28
Register and Login → → Device pairing and binding (make sure the Bluetooth functions on both the smartphone and Impulse 8060 are enabled) → → ※ If you do not want to bind to a device, select “Ignore and Next”.
Page 29
HOLUX Heart-Rate Smartband Impulse 8060 Basic Data Setting → → → → → You can start using the Impulse APP after completing the settings.
Page 30
HOLUX Heart-Rate Smartband Impulse 8060 Remove Device Pairing and Binding The device information under the “Setup” function can be used to remove device binding. → → → →...
HOLUX Heart-Rate Smartband Impulse 8060 Normal Care and Maintenance To ensure the unit’s normal operation and extended life span, please note the following while using and storing: Do not drop the unit If violently impacted or shocked, serious damage may be caused.
Page 32
Storage When the product is not being used for a long period, store Impulse 8060 in a cool and dry place. For long-term storage, keeping the unit in a dry box is recommended. Please do not keep Impulse 8060 in the following environments: ...
Need help?
Do you have a question about the Impulse 8060 and is the answer not in the manual?
Questions and answers