Advertisement
Quick Links
Osaka 2 Door 2 Drawer Wardrobe
Assembly Instructions -
Dimensions
:
Width
70.9 cm
Depth
:
52.0 cm
:
181.2 cm
Height
Assembly Instructions -
If you need help or have damaged or missing parts, call the Argos Customer Helpline: 0845 640 30 30
350263
Please keep for future reference
Please keep for future reference
White 2499949
Black 2584483
Issue 1 - 15-05-2014
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Argos Osaka 2 Door 2 Drawer Wardrobe
- Page 1 70.9 cm Depth 52.0 cm 181.2 cm Height Assembly Instructions - Please keep for future reference If you need help or have damaged or missing parts, call the Argos Customer Helpline: 0845 640 30 30 Issue 1 - 15-05-2014 350263...
- Page 2 ! Safety and Care Advice Important - Please read these instructions fully before starting assembly • Check you have all the • Do not stand or put weight on components and tools listed on the product, this could cause pages 2 and 3. damage.
- Page 3 Components - Panels If you have damaged or missing components, call the Argos Customer Helpline: 0845 640 30 30 Please check you have all the panels listed below Bottom (70,9 cm x 52 cm) (59,1 cm x 48,4 cm) Front rail...
- Page 4 Components - Fittings Please check you have all the panels listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. ø7.8 x 40mm Wooden dowel x ø6 x 30mm Wooden dowel x 8 ø3 x 35mm Screw x ø3 x 12mm Screw x...
- Page 5 Assembly Instructions Step 1 Assembly of the wardrobe. Step 1.1 Fix the posts onto the ø4 x 25mm Screw x sides using screws into the holes indicated. The top of the posts the sides must be flush. 350263-05...
- Page 6 Assembly Instructions Step 1.2 Knock the dowels into ø7.8 x 40mm Wooden dowel x ø5 x 8, cc34mm Bolt x 8 the holes indicated on the sides using a small hammer. Screw the bolts into the holes indicated on the sides Step 1.3 Fix the Crossplates ø3 x 12mm Screw x...
- Page 7 Assembly Instructions Step 1.4 Slide the top of the ø5.8 x 8mm Screw x 8 310 x 17 x 10mm Drawer runner x drawer runners backwards. You can identify the front end of the drawer runner Front end the two M4 holes. See Hole no.
- Page 8 Assembly Instructions Step 1.6 Fix the angles using ø4,2 x 9,5mm Screw x 44 x 23 x 23mm Angle x screws into the holes indicated on the front rail Step 1.7 Knock the dowels into ø7.8 x 40mm Wooden dowel x Magnet, adjustable x the holes indicated on the bottom...
- Page 9 Assembly Instructions Step 1.9 Place the sides ø15 x 10.5mm Cam x 8 onto the bottom and the back rail Push cams into the holes indicated on the bottom and the back rail . Arrows pointing towards the sides Turn the cams to the right to fix the sides Step 1.10...
- Page 10 Assembly Instructions Step 1.11 Place the front rail ø4,2 x 9,5mm Screw x as shown. Fix the angles to the sides using screws See detail. Step 1.12 Place the backs into 1.2 x 15mm Nail x the rabbet on the top into the H-profile Distribute equally ! onto the posts...
- Page 11 Assembly Instructions Step 1.13 Important! The wardrobe is heavy. Lift with care. Wall strap and instruction x 1 Its recommended that the wardrobe is fixed to the wall. Use the fittings . Follow the instructions included with the fittings. Step 2 Assembly of the drawers.
- Page 12 Assembly Instructions Step 2.2 Knock the dowels ø6 x 30mm Wooden dowel x 8 into the holes indicated on the drawer sides using a smal hammer. Step 2.3 Slide the drawer bottom into the drawer sides Step 2.4 Screw the bolts into ø5 x 8, cc34mm Bolt x 4 the holes indicated on...
- Page 13 Assembly Instructions Step 2.6 Important! Back fitting w. ø3.5 x 15mm Screw x Make sure the angle between the drawer front the drawer sides is 90° 90° before the drawer bottom is fixed using shown. To adjust the angle between the drawer sides and the fronts push the fitting sidewards.
- Page 14 Assembly Instructions Step 3 Assembly of the doors. Step 3.1 Place the cup hinges ø3 x 12mm Screw x ø26mm Cup hinge x into the holes indicated on the doors Fix the hinges using screws 35 x 12 x 1mm Magnet catch x Fix the magnet catches using screws into...
- Page 15 Assembly Instructions Step 3.2 Place the hanger rail ø27 x 24mm Metal Knob x M4 x 20mm Screw x into the supports Slide the cup hinges onto the crossplates Fix the hinges using the premounted screw in the crossplates. See details below on how to fit the cup hinge onto the cross plate Fix the metal knobs...
- Page 16 ALL the crossplates. Argos Customer Helpline: 0845 640 30 30 If you need help or have damaged or missing parts, call the Home Retail Group - 489-499 Avebury Boulevard - Saxon Gate West - Central Milton Keynes MK9 2NW...
Need help?
Do you have a question about the Osaka 2 Door 2 Drawer Wardrobe and is the answer not in the manual?
Questions and answers