Page 1
Bailey Changing Table Adaptable as Your Child Grows Up Assembly Instruction Manual Questions? Call Us at 1-800-515-4056 Website: www.lollyandme.com Adult assembly required due to the presence of small parts, sharp points & sharp edges. Before assembly, read these instructions. Make sure all pre-assembled parts are tight. Store this instruction manual for future reference.
Congratulations on Your Purchase! Thank you for choosing a Lolly & Me product. Don’t worry about the assembly. Inside you will find understandable step- by-step instructions with clear illustrations—it’ll be a piece of cake! If you get stuck, ring us up at 1-800-515-4056. Need a replacement part or is a part missing? Just call us and we’ll get one sent off to you right away.
Page 3
Changing Table Warnings Read all instructions before use of changing table. Before each usage or assembly, inspect unit for damaged hardware, loose joints, loose bolts and other fasteners, missing parts, or sharp edges. DO NOT use unit if any parts are missing LOLLY &...
Page 4
LOLLY & ME at 1-800-515-4056 or write to 10301 Bren Road West, # 0-379 Minnetonka, MN 55343 Fall Hazard - use of the product without this may result in death or serious injury to your child from falling. Never open more than one drawer at a time.
Page 5
Instructions for Assembly Bailey Changing Table Adaptable as Your Child Grows Up Let’s Put This Baby Together!
Page 9
STOP IF YOU EXPERIENCE ANY ISSUES WITH THIS PRODUCT BEFORE YOU RETURN THIS TO THE RETAILER PLEASE FOLLOW THE PROCEDURES LISTED ON THE FOLLOWING PAGE...
Page 10
PRODUCT ASSITANCE PROCEDURES IF YOU HAVE ANY QUESTIONS DURING ASSEMBLY OR YOU ARE MISSING PARTS, PLEASE CONTACT US DIRECTLY. PROCEDURES TO FOLLOW SHOULD YOU HAVE ANY QUESTIONS: FOR THE BEST AND MOST TIMELY SERVICE PLEASE CONTACT US VIA E-mail:customerservice@lollyandme.com phone us at 1-800-515-4056 or write to 10301 Bren Road West, # 0-379 Minnetonka, MN 55343 PLEASE PROVIDE THE FOLLOWING INFORMATION IN YOUR E-mail.
Page 24
Parts Needed: "L" Allen Wrench M6x10 mm Bolt (x8) "S" Allen Wrench...
Page 25
CHANGER KIT FITS STANDARD CHANGING PAD WITH SAFETY STRAP. CHANGING PAD AND SAFETY STRAP ARE NOT INCLUDED WITH CHANGER BUT CAN BE PURCHASED SEPARATELY. BE SURE TO USE A STANDARD THIN CHANGING PAD THAT MEASURES 16" X 32" X 1 " ALSO BE SURE TO USE SAFETY STRAP Continue to Step16..
Page 26
Anti tip/Wall strap kit assembly MUST be 3. "Once your baby is out of diapers, remove Topper and pad by removing metal brackets on back side of the table. Carefully remove Topper to create a dresser for your child to use for all other crib conversions".
Page 27
Disassembling Changing Table For Storage To disassemble Changing Table for storage, follow steps in reverse. Store all parts and hardware together in a safe place. Store the instruction manual for future reference and for reassembly. To clean Changing Table, use only mild household soap and warm water. Do not use bleach or detergent.
Page 28
Done! Pat Yourself on the Back ... Good Job! 10301 Bren Road West, Suite #0-379 Minnetonka, MN 55343 1-800-515-4056 Website: www.lollyandme.com Email: customerservice@lollyandme.com...