BCP SKY2950 Instruction Manual
BCP SKY2950 Instruction Manual

BCP SKY2950 Instruction Manual

38" vertical electric fireplace

Advertisement

Quick Links

INSTRUCTION
MANUAL
38" Vertical Electric Fireplace
SKY2950
Ver. 2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SKY2950 and is the answer not in the manual?

Questions and answers

Summary of Contents for BCP SKY2950

  • Page 1 INSTRUCTION MANUAL 38" Vertical Electric Fireplace SKY2950 Ver. 2...
  • Page 2 Thank you for choosing us! Since 2002, Best Choice Products has been bringing customers high-quality products at the absolute lowest price. With everything ranging from instruments and toys to furniture and outdoor, we’ve got your everyday living essentials covered. We’re centered around a customer-first philosophy –...
  • Page 3 NOTICE Please retain these instructions for future reference. • Please read through all instructions before mounting and using this fireplace. • Do not use the fireplace insert with any other mantel than the one provided by the manufacturer. • Do not use this heater if it is not installed properly in the mantel. •...
  • Page 4 TOOLS REQUIRED 2 PERSON APPROXIMATELY PHILLIPS NO. 6 ELECTRIC ASSEMBLY 30 MINUTE SCREWDRIVER DRILL BIT DRILL ASSEMBLY HARDWARE 6x25 mm WALL ANCHOR TOP BRACKET 4 PCS 1 PC 4 PCS PARTS REMOTE CONTROL CRYSTAL STONES FIREPLACE/HEATER 1 PC 1 PC 1 PC Pg.
  • Page 5 TOOLS REQUIRED WALL MOUNT ASSEMBLY • Position the part 3 top bracket on the wall and mark where the four screw holes will be. Make sure that the bracket is level. • Use an electric drill and size 6 drill bit to drill four screw holes. NOTE: It is recommended to use a level to ensure holes are drilled at an even height.
  • Page 6 TOOLS REQUIRED PLACING THE CRYSTALS Remove the two screws on the sides of the part A fireplace that secure the glass. Arrange the part C crystal stones according to your preference. Carefully lift the glass o the fireplace. Replace the glass and secure it with screws.
  • Page 7 HEATER/FIREPLACE OPERATION • This appliance has a safety-cut o that will engage if the fireplace overheats. The fireplace will NOT automatically reset for safety reasons. To reset the appliance, unplug the unit for 15 minutes and then plug it back in. •...
  • Page 8 WARNINGS REGARDING BATTERIES • Do not mix alkaline, standard (carbon zinc) and rechargeable (nickel hydride) batteries. • Do not mix old and new batteries. • Non-rechargeable batteries should not be charged. • Rechargeable batteries should be charged under adult supervision only. •...

Table of Contents