Operation - Comfort Glow QEF7541RKD Installation Instructions And Homeowner's Manual

OPERATION:

The heater controls are located on the top right corner of the insert.
Power: Press this button for main power function and flame effect. Press again to power unit off.
When heater is turned off, the unit fan will continue running for 30 second to dispense heat.
°C/°F:
Celsius/Fahrenheit: Press this button to switch between the two temperature scales. The
corresponding Celsius (C) or Fahrenheit (F) LED will indicate the setting.
Timer: Press this button for the timer function. The letters "0H" to "8H" will appear on the LED
screen. "0H" means there is no set running time set and the heater will run continuously. The "1H"
to "8H" indicates the number of hours that the heater will operate before shutting off.
Flame: Press this button for Flame Effect. The numbers "6" to "0" will appear on the LED screen "6"
indicates the highest and brightest flame. "0" means there is no flame effect.
Temperature: Press up or down to reach desired temperature. When desired ambient temperature is
reached, the heater will automatically stop heating. When the ambient temperature drops below the
desired temperature by 2° the heater will resume heating.
Note: When the power button is turned off, all other functions will stop even though the buttons may be in
the "on" positions.
~ 6 ~