Page 4
Step-By-Step Installation Instructions hole. If the soil is soft or unstable, then fountain base. Insert the fountain base into the hole will occur.
Page 5
the reservoir beneath the access hole in Pull the threaded ends of the hoses cut small holes to allow the hoses to be ...
Page 8
ACCESSORIES reinforced concrete to match your Liquid Art bubblers. Sedona Brown. ...
Page 9
Liquid Sedona Brown. any time as an add on to ensure that water is retained.
Page 10
FOUNTAIN CARE Caring for Your LiquidArt Rocks—Tips to Keep Your Bubblers Looking Great! years of enjoyment, with minimal care or maintenance required. Because they are made Cleaning—Dirt Spots and soft-bristle brush can be used as well, if needed. Cleaning—Algae and Moss deemed safe for colored concrete! Efflorescence—Causes and Cleaning/Removal...
Page 11
Note: Due to overspray and evaporation, clean water must be added periodically. Failing to do so could cause the water pump to run dry, resulting in a damaged pump. Damage to the water pump due to an inadequate water level in the fountain base will void the limited warranty.
Page 13
Email: info@liquidartfountains.com Address: 401 S. Redwood St. Canby, OR 97013 dates. Any information collected is for the use of LiquidArt only and LiquidArt, LLC...
Page 14
Mail Customer Satisfaction Survey and Warranty Registration to: LiquidArt, LLC, 401 S. Redwood St., Canby, OR 97013...
Page 15
Customer Satisfaction Survey and Warranty Registration (Please feel free to ** Mailing instructions on back...