Bissell REVOLUTION PET DELUXE Quick Start User Manual page 10

Filling Your Clean Water Tank:
Antibacterial Formula
1
The clean water
tank is at the top
of the machine.
Clean Water Tank
(1 Gallon)
Dirty Water Tank
4
With Trial Size
Antibacterial Formula:
Pour into the clean
tank up to the EasyFill
line. Twist cap back
on to tank.
A few notes about filling the clean water tank:
• Fill with hot (140°F/60°C MAX) tap water and add the appropriate
BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER
OR TANK IN MICROWAVE.
• When using BISSELL Antibacterial formula: Only fill your clean water
tank with the recommended amount of water and formula to achieve
antibacterial benefits.
NOTICE: Do not over wet carpet. Be careful not to run over loose objects or edges
of area rugs. Stalling the brush may result in premature belt failure.
NOTICE: BISSELL Antibacterial formula is only for BISSELL machines with EasyFill
System™.
10
www.BISSELL.com
2
Lift the clean water tank
straight up to remove
from the machine.
5
At the bottom of
the upper handle,
align the clean
water tank with the
grooves and slide
the tank into place.
3
Unscrew the cap from the
clean water tank. Add hot tap
water to the water fill line.
For Future Use with Full Size
Antibacterial Formula:
After filling the
clean water tank
with hot tap
water, twist the
yellow cap back
onto the tank.
Firmly insert the full size formula
bottle into the cap on the clean
water tank and squeeze until
formula reaches the EasyFill line.