Laser v-fitness NAV-PEDO10 Quick Start Manual

NAV-PEDO10
QUICK START GUIDE
WHAT DO THE BUTTONS DO
What's in the box
1 x NAV-PEDO10, 1 User Quick Start Guide
Correct mounting
Mount the pedometer as close the center of your body as possible.
Navigating the menus
- Repeatedly press the MODE button to move through the read-out options: MILES, KM, CALS and [BLANK] (Step Counter)
- Note: You can press the SET button to return to the Step Counter screen from any MENU feature.
Setting your stride and weight
- From the Step Screen, press the SET button to enter your Stride and Weight information
- The first screen shows the letter "L" and with 2 numbers flashing. This is the stride measurement in CM's
- While the numbers are still flashing press the MODE button to adjust the figure in increments of 5 CM's
- Press the SET button to move to the weight screen. The letter shown looks like a reversed number 7.
- Again use the MODE button to adjust the increments to intervals of 5 Kg's, while the digits are flashing.
- Wait 3 seconds without pressing any buttons to save the data and return back to the STEP counter screen.
Step Counter Function
- Select the Step counter screen.
- The counter will start working when movement is detected.
- To reset the counter, press the UP button until the counter returns to 0 (Zero)
Distance Travelled
- Press the MODE button until "KM" is displayed (or "MILE" for imperial measurements)
- The counter will then start working when movement is detected.
- To reset the counter, press the UP button until the counter returns to 0 (Zero)