Summary of Contents for Bowers & Wilkins 705 S2
- Page 2 Welcome and thank you for choosing Bowers & Wilkins. Bienvenue et merci d’avoir choisi Bowers & Wilkins. Notre Our founder, John Bowers, believed that imaginative design, fondateur, John Bowers, était persuadé qu’une conception innovative engineering and advanced technology were keys that imaginative, des innovations en terme d’ingénierie et des could unlock the enjoyment of audio in the home.
- Page 3 1. Unpacking Carton Contents Speaker Installation The speaker is primarily designed to be mounted on a dedicated Check in the carton for: floor stand (FS-700 S2), but may be placed on a shelf if preferred. 2 Foam plug However, it should be noted that this offers less flexibility to 8 Self-adhesive rubber supporting feet optimise the speaker’s performance.
- Page 4 2. Positioning 5 Channels 7 Channels >0.5m >0.5m 1.5m - 3m >0.5m 110° - 130° ~40° Speaker Positioning Home Theatre Systems Adjustment of speaker position following initial installation If the speakers are to be used for the front channels in a home will probably further improve the sound quality and is usually theatre system, they should be placed closer together than for worthwhile.
- Page 5 3. Connections All connections should be made with the audio equipment Ensure that the positive terminals on the speaker (marked + and switched off. coloured red) are connected to the positive output terminal on the amplifier and the negative terminals on the speaker (marked – and There are 2 linked pairs of terminals on the back of the speaker.
- Page 6 4. Fine Tuning Before fine tuning, make sure that all the connections in the If no alternatives exist, you can adjust your loudspeakers’ installation are correct and secure. low-frequency performance using the supplied foam bungs. The bungs are a two-piece part, allowing for a degree of Moving the speakers further from the walls will generally reduce fine-tuning using either the outer, larger-diameter piece the volume of bass.
- Page 7 5. Running In 6. Aftercare The performance of the speaker will change subtly during the The cabinet surfaces will usually only require dusting. If you wish initial listening period. If the speaker has been stored in a cold to use an aerosol or other cleaner, apply the cleaner onto the environment, the damping compounds and suspension materials cloth, not directly onto the product and test a small area first, of the drive units will take some time to recover their correct...
Need help?
Do you have a question about the 705 S2 and is the answer not in the manual?
Questions and answers