Table of Contents
Advertisement
Speakers
Smart Remote
OSS
Installation Menu Contents
Automatic
Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations.
channel scan
Digital Cable: Searches and stores cable DVB stations. Analogue: Searches and stores
(Retune)
analogue stations.
Manual
This feature can be used for direct broadcast entry.
channel scan
Network
Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial
channel scan
network channels. Digital Cable: Searches for cable network channels.
Analogue fine
You can use this setting for fine tuning analogue channels. This feature is not available if no
tune
analogue channels are stored.
Installation
Displays installation settings menu. Standby Search: Your TV will search for new or missing
Settings
channels while in standby. Any new found broadcasts will be shown.
(Optional)
Clear Service
Use this setting to clear channels stored. This setting is visible only when the Country option
List
is set to Denmark, Sweden, Norway or Finland.
Select Active
This setting allows you to select only the broadcasts within the selected network to be listed
Network
in the channel list. This feature is available only for the country option of Norway.
First time
Deletes all stored channels and settings, resets TV to factory settings.
installation
To hear the TV audio from the connected compatible audio device set as Amplifier.
You can use the remote control of the TV to control the volume of the audio device.
Press OK to open the Smart Remote menu screen. Using this screen you can discover
and connect the remote controller devices to your TV wirelessly.
Displays Open Source Software license information.
English - 18 -
Hide quick links:
Advertisement
Table of Contents
