Advertisement
Problems caused by faulty connection will invalidate the warranty.
2. Right LS. The loudspeaker terminal for the Right channel.
Upper one is Red (+), bottom one is Black (-).
3. Right Input. Two inputs: upper one is the a-symmetrical one with a RCA-cinch chassis
connector. The bottom one features a XLR connector. A switch is provided inside the amplifier,
to select the input desired. Standard the RCA-cinch input is connected.
This switch can only be accessed by an authorized Van Medevoort Service Center.
4. Left LS. The loudspeaker terminal for the Left channel.
Upper one is Red (+), bottom one is Black (-).
5. Left input. Two inputs: upper one is the a-symmetrical one with a RCA-cinch chassis
connector. The bottom one features a XLR connector. A switch is provided inside the amplifier,
to select the input desired. Standard the RCA- cinch input is connected.
This switch can only be accessed by an authorized Van Medevoort Service Center.
6. DC control. DC control can only be used with other Van Medevoort Pre and Main amplifier(s).
One can only switch the Power amplifier into STANDBY or ON, via the Van Medevoort Remote
Control. When used two (or more in case of multi channel) Power amplifiers, connect DC out
from the first PA to DC in of the second PA.
7.
IEC-USA Power Chassis Connector. To be connected with the proper wall socket, which must
be earthed or grounded. Every Van Medevoort product is optimized for your country's electrical
standards. e.g. 230V-50Hz or 115V-60Hz. This cannot be changed. Please check that your
product is set to the correct voltage setting BEFORE connecting to an AC power outlet.
5
vM PA362 STEREO POWER AMPLIFIER
Controls
Precautions
Connections
Maintenance and advice
Technical Specifications
2
3
4
5
6
7
Advertisement
