Table of Contents
Advertisement
User Manual
Main Menu – System Set – Pan/Tilt Device
Control: Keypad, mouse
* Mouse control: press ESC to PTZ mode, press AUTO button, and then once-click left button
of mouse to control PTZ movement.
Press quad button + number 1 ~ 4 button to set presets, press AUDIO + 1 ~ 4 to call preset.
Press AUTO to start auto presets, AUTO again to cancel.
Up/Down/Left/Right: PTZ dome direction control
+ / - : Zoom in / Zoom out
The AUTO command is 76 + Preset. The command would be different if connect to
others PTZ dome. It is normal if no any action after press AUTO.
Main Menu – System Set – F/W Upgrade
(HDD needs to be installed before update.)
Stop all hard disk working before update, select F/W upgrade and then press ENTER to
search firmware.
28
EVD-16/100A4JN
www.eurovideo-cctv.com
Advertisement
Table of Contents
