Installation; General Safety Requirements; Disposal And Recycling - Eagle L310A/AW/AG Manual

IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the user of the
product for future reference.
BEFORE USE
You must inspect the luminaire including its cable for any signs of damage. If the
product is damaged, DO NOT use it, and contact your supplier immediately.

INSTALLATION

Remove the fixing bracket from the body of the luminaire.
Attach the fixing bracket to a wall or post, using screws and, if necessary, wall
plugs.
Fit the body of the luminaire into the fixing bracket.
Connect the luminaire to the electricity supply using the lead provided.
• Brown = live
• Blue = neutral
• Green/yellow = earth
• The luminaire must be earthed.
If mounting outdoors then make sure that the connections are adequately
waterproofed.

GENERAL SAFETY REQUIREMENTS

• All electrical work must be carried out to the requirements of the latest
edition of the IEE wiring regulations (BS7671).
• Domestic wiring must be tested periodically by a qualified electrician at least
once every 10 years or at every change of occupancy.

DISPOSAL AND RECYCLING

You must not dispose of this luminaire with domestic household waste.
Most local authorities have specific collection system for appliances and
disposal is free of charge to the end-user.
When replacing an existing luminaire with a similar new luminaire your retailer
may take the old luminaire for disposal.
2