Television Setup And Functions - CyberHome LCTV 150 Owner's Manual

Television Setup and Functions

Connecting the Antenna or Cable TV Hookup (TV/CATV)
Connect a 75-ohm coaxial TV cable or 300-ohm television antenna to the TV's input connector.
VHF/UHF Antenna
Select TV or CATV as the Input Source
A
Press the TV/CATV button on the remote to toggle
TV/CATV
between TV or Cable TV as the current Input Source.
Auto Scan Channels
AUTO SCAN
B
To automatically scan through and add available
channels, press the AUTO SCAN button. The screen
will display a preview of the channels added to
memory. When the scan is finished, press ENTER to
save the selected channels in memory.
Note: When using the UHF/VHF Antenna (TV), 70
channels will be scanned, with those received being
added. With Cable TV (CATV) selected, 125 channels
will be scanned.
Adding and Deleting Channels
CHANNEL
C
To Delete a channel, select the channel and press the
DEL ADD
DEL button. You will see the message "DELETE?" on the
screen. Press the DEL button again to confirm the
deletion of the channel.
To Add a channel, select the channel and press ADD.
You will be prompted with a confirmation message:
"Add?". Press ADD again to add the channel to memory.
Antenna &
Cable TV In
TV - You are using an Antenna for Input
CATV - You are using a Cable TV Hookup
Cable TV Connection
A
B
8
Wall Jack
POWER
AUDIO
DISPLAY
STEREO ON/OFF
MUTE SAP
INPUT SELECT
TV/CATV AV3/4/FM PC-VGA
AV1/2
VOL.
ENTER
CH CH
VOL.
C
JUMP AUTO SCAN CHANNEL
DEL ADD
1 2 3 TIMER
4 5 6
CLOCK
7
8 9 0
OSD MENU
SLEEP
- +
SEL