Subscribe to Our Youtube Channel
Related Manuals for Rear view safety RVS-Pickup
Summary of Contents for Rear view safety RVS-Pickup
- Page 1 Instruction Manual Backup Camera System For Pickup Trucks RVS-Pickup Rear View Safety, Inc. © 2016 Reverse With Confidence ™...
- Page 2 TV viewer or screen located forward of the back of the driver’s seat or in any location that is visible, directly or indirectly, to the driver while operating the vehicle. Rear View Safety Reverse With Confidence ™...
-
Page 3: Installation
System. If you back up while looking a metal case, cover the cable with • Dropping the unit may cause only at the monitor, you may cause friction tape. A short circuit possible mechanical failure. Rear View Safety Reverse With Confidence ™... - Page 4 Step 3: Once all cables and wiring have been properly routed, perform a system function test by temporarily connecting the system. If the system seems to not be operating properly see troubleshooting (page 17). Rear View Safety Reverse With Confidence ™...
- Page 5 Fasten all cables and secure all excess cable. Connect camera to the • Feed as much cable as possible into vehicle & clamp securely. This reduces the possibility of cable being hooked or snagged. camera extension cable which runs inside the vehicle. Figure 1.2 Rear View Safety Reverse With Confidence ™...
- Page 6 0.2M space from the car. FIGURE 1.1 FIGURE 1.2 Accuracy Distance grid line accuracy may vary based on your camera angle. Adjust the distance grid lines to fit your application. Rear View Safety Reverse With Confidence ™...
- Page 7 FIGURE 2.1 FIGURE 2.2 1. RED- Power (+) 2. YELLOW- Video 3. GREEN- Mirror / Normal Imaging 4. WHITE- Audio 5. BLACK- Ground (-) Rear View Safety Reverse With Confidence ™...
-
Page 8: Specifications
Video Input: ° ° OPERATING TEMPERATURE C - 50 C / RH 95% MAX (Default) Camera to backup camera STORAGE TEMPERATURE ° C - 60 ° C / RH 95% MAX Signal System: PAL/Auto/NTSC Rear View Safety Reverse With Confidence ™... - Page 9 Connect known working camera • Verify camera cable is plugged into and cable to monitor port labeled Backup Camera • Verify that the green positive trigger on power harness is set to re- verse power 12v+ Rear View Safety Reverse With Confidence ™...
Need help?
Do you have a question about the RVS-Pickup and is the answer not in the manual?
Questions and answers