Advertisement
Charging Times
Be sure to charge the battery pack before you start using your Mylo Light.
We recommend charging the battery pack in an ambient temperature between 10°C~30°C (50°F~86°F)
until the charge lamps are fully lit. If you charge the battery pack outside of this temperature range, you
may not be able to charge it efficiently. Battery pack performance decreases when ambient temperature is
10°C (50°F) or below, and the length of time you can use the battery pack becomes shorter. In that case,
do the following to use the battery pack for a longer time. Put the battery pack into a pocket to warm it up,
& insert your Mylo light right before you turn it on.
About Battery Life
Battery capacity decreases over time and through repeated use. If you notice problems with the battery
keeping charge, it is probably time to replace it with a new one. Each battery's life is governed by storage,
operating, and environmental conditions.
Specifications
Specs
Beam Angle
Build Material
Cooling System
Dimming
Fixture Power Consumption
Fixture Size
Fixture Weight
Head Type
Lens
Light Source
Power Supply
Stand Mount
Optional Accessories
Some other products that work well with the Mylo Lights available from Ikan include:
CV600
HD-STND
ROLLR-STND10
SW-04
KCP-703
Normal Charge Time
~375 min
Digital LED Meter
Heavy Duty Light Stand
2 Stage Roller Stand 10 ft 6 in
Safety Wire
Stage Clamp w/ 16mm Stud
Fully Charge Time
~450 min
50°
Heavy Duty Metal Construction
Passive Cooling
Knob Control
24W; 7.4-14.8 VDC
14 x 7 x 2 in.
6 lbs
Bi-Color 5600K-3200K
45°
800 0.06 Watt LEDs
Input: 110-240 VAC
Output: 15 VDC@5.0A
Baby 5/8" Junior 1 1/8" Combo Pin
Advertisement
