Operation; On/Off; Play / Pause; Volume - Settings - Intenso Music Dancer Manual

5. Operation

a. On/Off
To activate the device, press the ON/OFF button for 2-3 seconds. The built-in LED will start to
light.
To deactivate the player, repeat this process. The built-in LED will turn off.
b. Play / Pause
Briefly press the ON/OFF button in order to start or pause playback.
During playback, the LED will blink. When paused, the LED will be continuously lit.
c. Volume – Settings
Briefly press the "+" or"-" buttons to increase or reduce the volume in steps. Keeping the
respective button pressed will adjust the volume seamlessly.
In compliance with the legal guidelines, this device has a protective function against the playback
of loud music.
Increase the volume using the "+" button. A beep will sound once a volume level has been
reached that has been set in the factory. You will then have to press the Play/Pause Taste button
immediately and then press the "+" button immediately after that to reach the desired volume
level. If the sequence of buttons was not performed quickly enough, multiple beeps will sound.
Simply repeat the process in this case and reduce the time between the individual Entries.
d. Song – Selection
To return to a song or change it, press the
backward within a song, simply keep the button pressed.
e. Button lock
To prevent undesired entries, the player has a button lock. Simply press the "-" button and the
Play/Pause button simultaneously for 2-3 seconds to activate it. The built-in LED will begin to
blink quickly to confirm this and the buttons will then be locked. To unlock them, perform these
instructions again. With the button lock activated, the device will only react to entries by blinking
the LED quickly. All other functions will be ignored.
f. Micro SD Card Reader
Inserting the memory card: place the included micro SD card or another compatible one with the
impression towards the clip and the contacts pointed forwards into the card jack on the MP3
player, until they lock into place.
Removing the memory card: Carefully press the inserted memory card deeper into the player
until you feel a slight resistance and then release the card. The built-in spring will eject the card.
forward or
Page 5 of 6 EN
back buttons. To jump forwards or