Summary of Contents for Technical Pro MB6000
- Page 1 User Manual ® Passive / Powered Monitor Speakers with Bluetooth Compatibility MODEL: MB5000 / MB6000 QUESTIONS / COMMENTS CALL 888-842-6277 or email info@tpro.com...
- Page 2 Congratulations and thank you for your purchase of this Technical Pro Monitor Speakers with Bluetooth® Compatibility, the MB5000 or MB6000.To get the most from your unit, it is recommended that you review all of the information provided in this instruction manual before operating this equipment.
- Page 3 MB5000 / MB6000 MB5000 / MB6000 Rear Panel: 1. Line Input (RCA): Connect your sound source to this RCA input. The line volume will be controlled by the volume knob located on the front panel of the unit. Only passive signals should be connected to this input.
- Page 4 Bluetooth enabled device (ie cell phone) and search for all Bluetooth connections until device names “TECHNICAL PRO” is found and pair with the device. The pair code is “0000”--- 4 zeros. Once paired the RED & BLUE leds will slowly flash indicating the unit has been successfully paired.
- Page 5 MB5000 / MB6000 MB5000 / MB6000 Remote: 1. Power Button: Press this button turn off the unit’s audio output. 2. Mode Selector: Press this button to switch between the input modes, Line / Bluetooth / USB. 3. Next Track / Previous Track Selector: Press these buttons to go to the next or previous track when using the USB input.
- Page 6 Slowly raise the volume to the desired levels. Adjust the bass and treble accordingly. The Bluetooth word mark and logos are registered trademarks owned by SIG, Inc. and any use of such marks by Technical Pro is under license. Other trademarks and trade name are those oftheir respective owners.
Need help?
Do you have a question about the MB6000 and is the answer not in the manual?
Questions and answers