Sharp LC-52SE94U Service Manual page 26

LC-52SE94U/LC-52SE941U/LC-65SE94U
18.Remove the 2 lock screws, 4 lock shafts and detach the Main Terminal Angle.
19.Remove the 6 lock screws and detach the MAIN POWER Unit.
20.Remove the 5 lock screws and detach the TERMINAL Unit.
21.Remove the 1 lock rivet and detach the Main Shield Plate.
22.Remove the 3 lock screws, 2 lock screws and detach the Heat Sink and MAIN Unit.
22
Heat Sink
19
MAIN POWER Unit
Main Shield Plate
21
18
MAIN Unit
18
22
18
Main Terminal Angle
TERMINAL Unit
20
4 – 11