Sony SLV-KA200PL Operating Lnstructions page 7

Audio/video (A/V) hookup
If your TV has audio/video (A/V) input jacks, you will get a better picture
and sound if you hook up your unit using these connections.
You should also connect the audio outputs of your unit or TV to your stereo
system for a true "home theater" experience.
You're finished setting up the unit after you've made the connections.
If your TV doesn't have A/V inputs, see page 8 for antenna hookup.
A Use this hookup if your TV has stereo jacks
This unit
AUDIO VIDEO
LINE 1 IN
LINE 1 OUT
Audio/video cable (supplied)
B Use this hookup if your TV doesn't have stereo jacks
This unit
AUDIO VIDEO
LINE 1 IN
LINE 1 OUT
Video cable (not supplied)
Tip
• You can also use LINE 2 OUT jacks on the front of the unit.
Notes
• (SLV-KF300PL only)
To play a tape in stereo, you must use the A/V connection.
• (SLV-KA200PL only)
The sound is played back in monaural with either type of connection.
However, when stereo equipment is connected to the LINE 1/2 IN jacks, the sound
is output in stereo. If you connect stereo equipment to the LINE 1 IN jacks, set
AUDIO INPUT MODE on the rear of the unit to STEREO.
TV
IN
VIDEO AUDIO OUT
AUDIO
TV
IN
VIDEO
AUDIO
Audio cable (not supplied)
Stereo receiver
AUX IN
Stereo receiver
AUX IN
continued
Getting Started
7