Hitachi DV-P415U Service Manual page 21

Disassembly and Reaasembly
4-4-3 Housing Ass'y Removal
1) Remove Belt Œ.
2) Push the Hook ´ in the direction arrow "A" and lift up Pulley Gear ˇ.
3) Push the Slider Housing ˆ in the direction arrow "B" and lift up the Gear Tray ¨.
4) Lift up the Slider Housing ˆ.
5) Remove the soldering Ø of 2 points (Red, Black).
6) Remove 2 Screws ∏ and lift down the Motor Load Ass'y ".
7) Push the 3 Hooks ' bottom side in the direction arrow "C" and lift up the Housing PCB ˝.
8) Push the Hooks Ô and remove Deck PCB .
"B"
∏ 2 SCREWS
´ HOOK
ˆ SLIDER HOUSING
"A"
¨ GEAR TRAY
ˇ PULLEY GEAR
ΠBELT
Ô HOOK
" MOTOR LOAD ASSY
˝ HOUSING PCB
 DECK PCB
"C"
Ø SOLDERING
"C"
"C"
' 3 HOOKS
<Bottom Side>
Fig. 4-10 Housing Ass'y Removal
4-10