Advertisement
1) STANDBY / ON
BUTTON 10) SKIP / TUNE
2) FUNCTION BUTTON
3) INTRO BUTTON
4) P. E Q BUTTON
5) SLEEP BUTTON
6) TIME (TIMER) BUTTON
7) MEM (MEMORY) / CLOCK BUTTON
8) MUTE BUTTON
9) SKIP / TUNE
BUTTON
INSTALLATION BATTERY
Insert 2 AAA size batteries (not included) into the battery compartment of the remote controller and
replace the cover.
BATTERY REPLACEMENT
When the battery become too weak, the operating distance of the remote controller is greatly reduced
and you will need to replace the battery
Open the battery compartment cover, use a screwdriver or other tool to push out the battery (follow the
exit direction in pushing out). Push in the new battery in the opposite direction (the+polarity is faced up.)
Put the cover back and secure.
Note:
To maintain the accuracy and long life of the transmitter,do not press two or more buttons simultaneously.
If the remote control is not used for a long time, remove the battery to prevent possible damage through
leaking battery.
USING THE REMOTE CONTROLLER CORRECTLY
Point the remote controller at the Remote Sensor.
The functions of the buttons on the remote control are the same as the corresponding controls on the
main unit.
When there is a strong ambient light source, the performance of the infrared Remote Sensor may be
degraded, causing unreliable operation.
The maximum effective distance for remote control operation is about 15 feet.
REMOTE CONTROL
BUTTON
11) VOLUME- BUTTON
12) VOLUME+ BUTTON
13) PLAY / PAUSE
BUTTON
14) STOP
/ BAND BUTTON
15) M-UP /REPEAT BUTTON
16) DISPLAY BUTTON
17) RANDOM BUTTON
3
2
4
1
5
17
6
16
7
15
8
14
13
9
12
10
11
Advertisement
