Electrical Requirements; Set Up & Use - Westinghouse WHD101 series User Manual

Electrical fan heater
Table of Contents

Advertisement

SAFETY INFORMATION
10. Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or fire, or
damage the heater.
11. To prevent a possible fire, do not block air intakes or exhaust
in any manner. Do not use on soft surfaces, like a bed, where
openings may become blocked.
12. A heater has hot, arcing or sparking parts inside. Do not use it
in areas where gasoline, paint, or flammable liquids are used or
stored.
13. Use this heater only as described in this manual. Any other use
not recommended by the manufacturer may cause fire, electric
shock, or injury to persons.
14. Always plug heaters directly into a wall outlet/receptacle. Never
use with an extension cord or relocatable power tap (outlet/
power strip).
SAVE THESE INSTRUCTIONS
SAFETY INFORMATION

ELECTRICAL REQUIREMENTS

This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit into a polarized outlet
only one way. If the plug does not fit into the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to modify the plug in
any way.
POWER SUPPLY CORD
1. A short power supply cord is provided to reduce the risk of becoming
entangled in or tripping over a longer cord.
NOTE: Neither Westinghouse nor the dealer can accept any liability for damage to the
product or personal injury resulting from failure to observe the electrical connection
procedures.
WARNING: To reduce the risk of electric shock, do not use with an extension cord.
SET UP & USE
INSTALLATION
The appliance requires no installation; it should be used solely as a portable
appliance. Portable appliances are not suitable for use in a bathroom.
Page 4
HOUSEHOLD USE ONLY

Advertisement

Table of Contents
loading

Table of Contents