Related Manuals for Zanussi ZRB35424WA
Summary of Contents for Zanussi ZRB35424WA
- Page 1 User Manual GETTING STARTED? EASY. ZRB35424WA ZRB35424XA ZRB35426WA ZRB35426XA EN User Manual Fridge Freezer...
-
Page 2: Safety Information
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. -
Page 3: Safety Instructions
Clean the appliance with a moist soft cloth. Only use neutral • detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. Do not store explosive substances such as aerosol cans with a • flammable propellant in this appliance. If the supply cord is damaged, it must be replaced by the •... -
Page 4: Operation
• Do not touch the compressor or the condenser. defrosted water collects in the bottom of the They are hot. appliance. • Do not remove or touch items from the freezer DISPOSAL compartment if your hands are wet or damp. •... -
Page 5: Daily Use
• quantity of food stored Coldest setting: +2°C. • appliance location. Warmest setting: +8°C. 1. Touch temperature regulator. A medium setting is generally the most Current temperature indicator blinks. Any time you suitable. touch the temperature regulator, the setting moves by one position. -
Page 6: Care And Cleaning
CARE AND CLEANING DEFROSTING OF THE REFRIGERATOR WARNING! Refer to Safety chapters. Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal CLEANING THE INTERIOR use. The defrost water drains out through a trough into a special container at the back of the Before using the appliance for the first time, wash appliance, over the motor compressor, where it... - Page 7 WHAT TO DO IF... Problem Possible cause Solution The appliance is noisy. The appliance is not suppor- Check if the appliance stands ted properly. stable. The lamp does not work. The lamp is in stand-by. Close and open the door. The lamp does not work.
-
Page 8: Installation
Problem Possible cause Solution The QuickFreeze function is Refer to "QuickFreeze function". switched on. REPLACING THE LAMP If the advice does not lead to the The appliance is equipped with a longlife LED desired result, contact the nearest interior light. Authorised Service Centre. -
Page 9: Technical Data
INSTALLATION OF THE APPLIANCE AND Make sure the electricity supply voltage is the DOOR REVERSAL same as that indicated on the appliance rating plate. Please refer to separate instructions 5. Switch on the appliance. on installation (ventilation The appliance is supplied with a 13 amp fuse (B). requirements, levelling) and door In the event of having to change the fuse in the plug reversal. - Page 12 WWW.ZANUSSI.COM/SHOP...