Curtis iP220 Instruction Manual page 7

Installing a Battery in the Remote
To install or replace the battery:
1 Pull the battery tray out of the remote.
2 If you are replacing the battery, remove the old battery and
3 Insert the new battery into the battery tray, orienting it the same
4 Close the battery tray.
7
Warning
There is danger of an explosion if you replace the battery
incorrectly. Replace only with the same or equivalent battery.
1
LITHIUM BATTERY
dispose of it properly. Note the orientation of the + and - sides of
the battery.
way the old battery was placed.
2
CR2025
3V
3