Download
Share
Print this page
  1. Manuals
  2. Brands
  3. PORTMAN Manuals
  4. Gps tracker
  5. GT2000NP
  6. Operation manual

PORTMAN GT2000NP Operation Manual

Gps&gprs personal tracking
Hide thumbs

Advertisement

Quick Links

Download this manual
OPERATION MANUAL
GPS&GPRS PERSONAL TRACKING
GT2000NP/GT2500NP

Advertisement

loading
Need help?

Need help?

Do you have a question about the GT2000NP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PORTMAN GT2000NP

  • Page 1 OPERATION MANUAL GPS&GPRS PERSONAL TRACKING GT2000NP/GT2500NP...

  • Page 2: Brief Introduction

    The report parameters can be set from the PC setup program. GT2000NP/GT2500NP can be set to go in sleep mode (while not moving), the system will cut the power of GPS module in order to save power. With build-in 3-D acceleration sensor, GT2000NP/GT2500NP can select related reporting modes with respect to it is moving or not.
  • Page 3 Recharge battery need three hours, after finish recharging, Power LED will change to green. Call Monitoring: user can send a SMS that included the preset password of the unit. GT2000NP/GT2500NP will send “PASS” SMS ACK back, unit will auto answer the phone in the following 10 minutes.

  • Page 4: Panel Installation

    III. PANEL INSTALLATION (1): Unit with 1700mAh battery PC-SETUP (2): Unit with 1050mAh battery PC-SETUP IV. BUTTON OPERATION: Button Indication Functions Conditions Press power switch Power off Power LED flash 1time/3sec. Power ON button once Power LED normal is green, if low Low power power then change to red Press power switch...
  • Page 5 No incoming call is Power LED flash 2time/3sec. received and When a self-geo-fence is set, the Self-Geo-fence ON unit will chirp twice self-Geofence off Press button1 once No incoming call is received and Power LED restore normal Self-Geofence OFF self-Geofence on Power LED flash quickly 3 times then restore normal If there is a GPS signal when an...
  • Page 6 No incoming call is Exit monitor mode received in monitor Power LED restore normal mode Power LED flash quickly 5 times then restore normal. When a “help” No incoming call is Send help report Press button3 for report is sent, the unit will chirp received 2sec.
  • Page 7 V. PC SETUP AND SYSTEM INITIATION PC setup Procedure: 1.) Connect the standard RS232 cable to the DB9 port. 2.) Open the PC setup program. 3.) Select the correct COM port for communication. 4.) Click “OK” to start the program 5.) Power on the device.
  • Page 8 C. MAIN INTERFACE 1. [User detail]: If the SIM card is password protected, user can input the “SIM PIN” window to set password of SIM Card. Set UNIT ID and UNIT password of for the device. Set Access Point Name (APN), User Name, Password. The maximum length of the APN, User name and Password is 49 characters.
  • Page 9 “Initialize” button: clear all data in UNIT. Request All: read out the whole existing setting from GT2000NP/GT2500NP Request: read out the setting in the current page. Apply: transfer the setting to GT2000NP/GT2500NP in the current pages.
  • Page 10 Report setup can be configured in this section. To activate the function(s), please select “√” in checkbox and fill in data in the textbox. There are 2 modes for the GT2000NP/GT2500NP, first is the Normal mode, and second is the Power saving mode. In normal mode, the GPS will be always activated if GT2000NP/GT2500NP is in moving state.
  • Page 11 Power saving mode While in Power saving mode, GT2000NP/GT2500NP will cut off the GPS power if there is no report to send. Report configuration will be listed as: the fixed time report while moving, and wakeup report / or no GPS wakeup report while stop.
  • Page 12 GPRS connection is valid or not. If not, it will actively reconnect to GPRS network. Special command for SMS mode: If the GT2000NP/GT2500NP is not in the GPRS online status, user can send command &&Y02 or &&Y04 to ask unit to connect to server. This command can be sent from any device via SMS;...
  • Page 13 “acceleration sensor”. It is distinguished by the tilt angle of the device. If the unit tilted more than the degree set here, GT2000NP/GT2500NP will be in moving mode. Otherwise, it will be in stop mode. The smaller the parameter of degree for the sensor set in pc-setup is, the higher the sensitivity is, otherwise, the result is the opposite.
  • Page 14 GPRS* Frequency Range (MHz) 900&1800&1900 or 850&1800&1900 models Channel spacing (Hz) GPRS connectivity GPRS multi-slot class 10 GPRS mobile station class B SIM card interface SMS storage Capacity 40 in ME Antenna Impedance 50ohms Antenna Type Embedded antenna GPS* Chipset SiRF Star III technology Channels Protocol...
  • Page 15 VI. Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.

This manual is also suitable for:

Gt2500np