Curtis DVD7620 User Manual page 11

Curtis dvd7620 dvd-vcr combo: user guide
Table of Contents

Advertisement

VCR Basic Operation
To Start Playback
1. Press [
/ POWER] to power on.
2. Press VCR of the remote control or TV/VCR of
the front panel to enter VCR mode.
3. Insert the desired videotape.
4. Press VCR/PROG. of the remote control to
select PROGRAM 1 of the VCR mode.
5. Press PLAY/PAUSE to play the videotape.
6. To Stop Playback, press STOP.
7. To pause playback, press PLAY/PAUSE.
8. To play fast forward or to rewind playback,
press F.F
or F.R.
9. Press OPEN/CLOSE of the remote control or
EJECT of the front panel to remove the
videotape.
Copying from DVD to Videotape
1. Insert the desired DVD disc. If the DVD disc
has copy protect function, you cannot copy it.
2. Insert a recordable tape.
3. Correct the AV (Video and Audio L) jacks with
RCA cables to the TV.
4. Press DVD of the remote control to select DVD
mode and play the disc.
5. Go to desired DVD chapter of the disc and
press REC of the remote control or of front
panel to start recording desired DVD chapter.
• DVD plays and VCR starts recording.
6. To exit copying, press STOP.
7. Press VCR to select VCR mode.
8. Press F.R.
(Rewind) of the remote control to
go back to the beginning of the recording track.
Press STOP and then PLAY/PAUSE to play the
recorded portion.
Select External Input
Press AV1/AV2 of the remote control to select
between broadcasting mode: AV1 or AV2.
Recording from External Input
1. Insert a recordable tape.
2. Press AV1/AV2 of the remote control repeat-
edly to select desired external input.
3. Press REC to start recording.
4. Press STOP to stop the recording.
CURTIS DVD7620_Engib.p65
.
- 11 -
11
Recording from Antenna Input
1. Insert a recordable tape.
2. Press AV1/AV2 of the remote control repeat-
edly to switch to broadcasting mode.
3. Use (
,
) or number buttons to select your
desired TV station.
• If you cannot receive a TV station, follow the
procedures of "Setting the Channel Set" page
in this manual to automatically scan all TV
stations receivable.
4. Press REC to start recording.
5. Press STOP to stop the recording.
One Touch Timer Recording (OTR)
1. Follow the steps 1 to 4 in "Recording with VCR".
2. Press REC as much as you want.
• See the recording times below.
Press once.. continuous recording until you press
STOP.
Twice.......... recording for thirty minutes from
current time.
3(times)....... recording for one hour
5.................. recording for two hours
7.................. recording for three hours
9.................. recording for four hours
11................ recording for five hours
13................ recording for six hours
15................ recording for seven hours
17................ recording for eight hours
18................ recording as pressing REC once only.
3. To Stop Recording mode, press STOP more
than 8 seconds.
Enjoying another TV Program During
Recording
Press TV/VCR on the remote control or front
panel, "TV" appears on the TV screen. Now you
may enjoy another TV program with your TV.
Press TV/VCR again to return to VCR mode,
"VCR" appears on the display.
5/3/2007, 11:35 AM

Advertisement

Table of Contents
loading

Table of Contents