Table of Contents
Advertisement
3 Get started
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
•
For optimal sound, use the supplied speakers only.
•
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Secifications section of this manual.
1
Insert the speaker wires completely into
the speaker input sockets on the back of
the unit.
Demonstrate the unit's
features
1
In the standby mode, press
ON" is displayed.
» This system's features are displayed
one by one.
•
To turn off the demonstration, press
again.
Direction of Use
until "DEMO
Connect FM aerial
Tip
•
For optimal reception, fully extend and adjust the
position of the antenna.
•
For better FM stereo reception, connect an outdoor
FM antenna to the FM AERIAL socket.
•
The unit does not support MW radio reception.
1
Connect the supplied FM antenna to the
FM AERIAL socket on the main unit.
Connect power
Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•
Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•
Before you connect the AC power cord, ensure that
you have completed all other connections.
1
Connect the power cable to the wall
socket.
7-3
FM
Hide quick links:
Advertisement
Table of Contents
