Advertisement
Quick Links
Curtis TID-981
OWNER'S MANUAL AND OPERATING INSTRUCTIONS
FEATURES:
CALLER ID WITH CALL WAITING
BUILT-IN CALLER I.D. SPEAKERPHONE
ENLARGED 3-LINE LCD DISPLAY
ENGLISH/SPANISH/FRENCH LANGUAGES SELECTABLE
55 CALL MEMORIES (NAME & NUMBER)
3 EMERGENCY ONE-TOUCH MEMORIES
12 MEMORY SPEED DIALING
LOCATION OF CONTROL
1. Delete Button
2. Scroll Up Button
3. Scroll Down Button
4. Dial Button
5. Hand Set
6. Mode Button
7. Auto Button
8. Pause Button
9. Flash Button
10. Redial Button
11. Speakerphone Button
12. Speaker "on" LED
13. Microphone
14. Ear Set Jack
15. Hold Button
16. Mute Button
17. Reset
18. One Touch Memory Button (M1-M3)
19. N/A Button
20. Right Button
21. Left Button
22. Volume Switch
23. Tone/Pulse Switch
24. Ringer On/Off Switch
25. DC 9V Jack
Advertisement
Related Manuals for Curtis TID-981
Summary of Contents for Curtis TID-981
- Page 1 Curtis TID-981 OWNER’S MANUAL AND OPERATING INSTRUCTIONS FEATURES: CALLER ID WITH CALL WAITING BUILT-IN CALLER I.D. SPEAKERPHONE ENLARGED 3-LINE LCD DISPLAY ENGLISH/SPANISH/FRENCH LANGUAGES SELECTABLE 55 CALL MEMORIES (NAME & NUMBER) 3 EMERGENCY ONE-TOUCH MEMORIES 12 MEMORY SPEED DIALING LOCATION OF CONTROL 1.
- Page 2 26. Tel Line Jack CAUTION This telephone must be used with AC/DC adapter. AC Adapter for DC jack Specification: Input AC 110V/60Hz AC 220V/50Hz Output DC 6V-9V. 100mA POLARITY OF PLUG +, - Installation 1. Open the battery compartment cover, load 1X9V batteries.
- Page 3 If you want to select a new language mode, press the “RESET” to restart the setting up procedure. Choosing Tone or Pulse dialing For the telephone to work correctly, you must set it to the type of your dialing system: Tone or Pulse dialing Set the DIAL MODE switch to: “Tone”...
- Page 4 2. When you finish talking, replace the handset in the cradle. The call is disconnected Redialing You can redial the last number called with just one touch of the REDIAL button. This lets you easily redial the same number again if the line was busy. 1.
- Page 5 If you have message: icon appears on the display. This display will be cleared when you retrieve your messages. You cannot use this feature, if you have not subscribed to your telephone company’s message service for details on service availability, please ask your telephone company.
- Page 6 Preferred Calls: Rings with alert beeps Unwanted Calls: Does not Ring or beep Press [FLASH] Button again for 3 seconds to cancel this function Emergency Reset This button is used to completely erase and reset all stored memory including the Caller I.D.