Assembly; Preparing To Assemble The Hedge Trimmer; Step 1 - Qualcast GHT500A1 Assembly Manual

Assembly

Preparing To Assemble The Hedge Trimmer

Always take care when removing the packaging to prevent damage to you or to the hedge trimmer.
IMPORTANT! Before assembling the hedge trimmer, check all the parts indicated in the manual
are in the box. Inspect all the parts for signs of damage. Do not assemble the hedge trimmer if you
observe any damaged components.
NOTE: Before using the tool, read the instruction book carefully.
Remove all parts of the hedge trimmer from the box and carefully remove all packaging. Take care
not to lose any instructions which may be attached to the tool, these provide important information
which will be required while assembling the hedge trimmer.
b
a

Step 1

WARNING! Take great care when doing this as the blade has a very sharp cutting edge .
Remove blade sheath.
Customer Helpline 0344 801 0979
5
ORIGINAL INSTRUCTIONS