Using The Dance Music Mode; Creating A Build Up - Casio LK-190 User Manual

Playing in the Dance Music Mode
 Track reset switch
Pressing this key while playback is in progress returns
playback to the beginning of the currently playing phrase.

Auto build up switches
These keyboard keys can be used to apply build up effects
that are a characteristic of dance music. See "Creating a Build
Up" (page EN-12).

Using the Dance Music Mode

1.
Press br DANCE MUSIC.
2.
Use the bq (10-key) [–] and [+] keys to select a
pattern.
• For a list of patterns, see the "Dance Music Mode List"
(page A-6).
• Changing the pattern normally causes the tempo and tone
to change to the settings configured for each pattern. If you
do not want these settings to change, see "Dance Music
Tempo Setting" (page EN-4) and "Dance Music Tone
Setting" (page EN-4).
3.

Press a Pattern phrase switch.
This starts pattern play.
Now you can press other part pattern phrase keys to
increase the parts that are sounding, change to a different
phrase, and configure other combinations.
4.
Pressing a keyboard key that corresponds to a
pattern phrase that is sounding stops the phrase.
• You can also start and stop pattern playback by
pressing bl START/STOP in step 3.
• The key and the indicator of the on-screen keyboard key
that corresponds to the pattern phrase that is playing light.
• Melody keyboard keys do not light in the Dance Music
Mode.
• Pressing a keyboard key to which an effect is assigned
applies the effect.
Changing the Melody Keyboard Tone
After pressing bo TONE, use the bq (10-key) [–] and [+] keys
to select a tone for the right-half melody keyboard.
Hold down bo TONE to select the tone recommended for the
selected pattern.
• Press br DANCE MUSIC to return to the pattern selection
screen.
EN-12
Changing the Tempo
You can use the tempo setting operation to change the tempo
of pattern play. See "Changing the Metronome Tempo" (page
EN-9).

Creating a Build Up

The build up functions can be used to create build ups while
pattern play is in progress, to apply effects and build ups that
are characteristic of dance music.
Function
Description
Name
PITCH Each press of a keyboard key
changes the overall pitch of the song.
Pressing the PITCH DOWN key
lowers the pitch in semitone units,
while PITCH UP raises the pitch in
semitone units.
CHANGE Instantly changes the pattern phrase
of the currently playing song.
ROLL
Cuts out part of a song, repeats it,
and applies fine performance effects.
FILTER Applies effects that make notes
darker (by cutting high-range
frequencies) or brighter (by cutting
low-range frequencies).
GATE
Applies an effect that finely chops a
song.
ENDING Ends the currently playing song
while applying various effects.
*1 Depending on the part, some pattern phrases are not
changed.
*2 How an effect is applied changes randomly with each
keyboard key press. Effects are applied for a fixed amount
of time. The keys and the on-screen keyboard key
indicators of the pattern phrase flash to indicate that an
effect is being applied.
• The auto build up function is executed from the next note
immediately after a keyboard key is pressed.
• Though effects and the build up function can be used at the
same time, the effect currently being executed may stop.
• The display shows the applicable function name while
build up functions are being used.
Remarks
*1
*1
*2
*2
*2
*2