Summary of Contents for i-MO 200-S Series
- Page 1 Hardware Installation Guide i-MO 200-S Series Bonding Router Hardware Installation Guide for the i-MO 200-S Series Appliance...
-
Page 2: Table Of Contents
Safety ..............................16 Choosing a Mounting Location ......................17 Mounting the Antennas ........................17 Connecting the External Antennas to the i-MO ................... 17 Appendix C - Disposal and Recycling Information ..................18 WEEE EU Directive ............................. 18 ELECTRONIC MEDIA SERVICES LIMITED... - Page 3 EMS i-MO 200-S Series Hardware Installation Guide Version Reduction of Hazardous Substances ......................18 Appendix D - Warranty Information ......................... 19 EMS's Limited Warranty Statement (1-Year Warranty) ................19 One-Year Limited Warranty ......................... 19 Obtaining Technical Assistance ........................20 ELECTRONIC MEDIA SERVICES LIMITED...
-
Page 4: I-Mo Appliance Identification Guide
EMS i-MO 200-S Series Hardware Installation Guide Version I-MO Appliance Identification Guide The following diagram shows the basic and optional i-MO 200-S Series hardware components. ELECTRONIC MEDIA SERVICES LIMITED Page PASSFIELD BUSINESS CENTRE, LYNCHBOROUGH ROAD, LIPHOOK, HAMPSHIRE, GU30 7SB, UK... -
Page 5: General Safety Guidelines For Ems Hardware Equipment
EMS i-MO 200-S Series Hardware Installation Guide Version General Safety Guidelines for EMS Hardware Equipment The following guidelines help ensure your safety and protect the hardware equipment from damage. The list of guidelines might not address all potentially hazardous situations in your working environment, so be alert and exercise good judgment at all times. -
Page 6: Product Disposal Warning
AC Power Electrical Safety Guidelines The i-MO 200-S Series appliance requires an AC supply of 100-240Volts, 50/60Hz and can draw a current of up to 2 Amps. i-MO routers are shipped with a three-wire electrical cord with a grounding-type plug that fits only a grounding-type power outlet. -
Page 7: Hardware Installation Guide
Version Hardware Installation Guide The i-MO appliance is supplied un-configured unless otherwise agreed with your supplier. Please confirm the specification of the unit with your supplier as not all features are supported on every unit. This guide describes how to connect and get started with the device. Electronic copies of this guide can be found by... - Page 8 EMS i-MO 200-S Series Hardware Installation Guide Version Step 2 - The first modem must be placed in the Modem A position as shown in image above. Insert the modem as shown image above, then push down into place as shown in image above.
-
Page 9: How To Install Sim Cards (Optional If Not Already Fitted)
3) How to install SIM cards (optional if not already fitted) If SIM cards have been supplied to you with the i-MO unit, then they will already be installed. If you need to insert or replace SIM cards then these need to be installed in the SIM card slots inside the appliance as illustrated below. -
Page 10: How To Close The Appliance (Optional)
5) How to attach the WiFi antenna The i-MO appliance is supplied with a WiFi interface. This can be enabled on request at time of order. If the WiFi interface is enabled install the WiFi antenna on the WiFi aerial connector next to the USB port as shown below. -
Page 11: How To Attach The Default 3G/4G 'Type C Stub' Antennas
7) How to attach network and ADSL cables (optional) The i-MO appliance provides two Ethernet ports at the rear. Each of these can be individually configured as WAN or LAN ports. Network cables (not provided) can be connected as shown below. The default configuration is all ports configured for LAN usage (2 port network hub). -
Page 12: How To Switch The Power On
EMS i-MO 200-S Series Hardware Installation Guide Version 9) How to switch the power on The power for the unit is switched on when the mains power is connected and switched on (there is no separate power switch on the device). This is used to turn the appliance on (boot) or off. As soon as the power is supplied the Power LED on the display will illuminate to show that the appliance is powering up. -
Page 13: Status Display
EMS i-MO 200-S Series Hardware Installation Guide Version 10) Status display The LED display shows the status of up to two mobile connections plus the overall status of the link. Link Status This shows the overall status of the links which can either be UP or DOWN. When the link is DOWN the appliance is not able to send or receive data. -
Page 14: Appendix A - Wifi Radio Component
EMS i-MO 200-S Series Hardware Installation Guide Version Appendix A - WiFi Radio Component Warnings When using the device, ensure that the antenna of the device is at least 1 cm away from all persons. Do not use the device where using wireless devices is prohibited or may cause interference or danger. -
Page 15: Certification Information (Sar)
EMS i-MO 200-S Series Hardware Installation Guide Version Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by EMS Ltd could void the user’s authority to operate the equipment. -
Page 16: Appendix B - 3G / 4G Radio Component
Version Appendix B - 3G / 4G Radio Component Up to two 3G / 4G radio components may be attached to the i-MO to provide a 3G / 4G signal. Default Aerial Type C Stub External Aerial Type B Mag-whip... -
Page 17: Choosing A Mounting Location
EMS i-MO 200-S Series Hardware Installation Guide Version If any part of the antenna system should come in contact with a power line, don’t touch it or try to remove it yourself. Call your local power company. They will remove it safely. If an accident should occur with the power lines call for qualified emergency help immediately. -
Page 18: Appendix C - Disposal And Recycling Information
EMS i-MO 200-S Series Hardware Installation Guide Version Appendix C - Disposal and Recycling Information This device (and any included batteries) should not be disposed of as normal household garbage. Do not dispose of your device or batteries as unsorted municipal waste. The device (and any batteries) should be handed over to a certified collection point for recycling or proper disposal at the end of their life. -
Page 19: Appendix D - Warranty Information
Version Appendix D - Warranty Information EMS's Limited Warranty Statement (1-Year Warranty) Thank you for purchasing the enclosed i-MO Appliance. The product is provided with a one year limited warranty commencing from the date of purchase. One-Year Limited Warranty THIS PRODUCT IS PROVIDED TO YOU UNDER THE FOLLOWING TERMS AND CONDITIONS THAT CONTAIN LIMITATIONS ON WARRANTIES AND LIABILITIES AND YOUR REMEDIES. -
Page 20: Obtaining Technical Assistance
EMS i-MO 200-S Series Hardware Installation Guide Version This warranty gives you specific rights and you may also have other rights, which vary from jurisdiction to jurisdiction. Some jurisdictions do not allow the exclusion of implied warranties and conditions and do not permit the exclusion or limitation of certain damages.