Menu Operation; Basic Operation - Curtis LCDVD151A Instruction Manual

Menu Operation

Basic operation

The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides
graphical presentation.
NOTE: If this is the first time you run the LCD TV, the Initial Setup Menu will appear in the picture, and
the items of this menu also exist in other menus, so you are able to change the values after you
set them up.
Initial Setup Menu
Menu Language
Tuning Band
Auto Ch Search
To Move To Select
Enter
Menu Language
Press ▼ / ▲ button to select this item, then press ENTER/► button to select the OSD language.
Tuning Band
Select Tuning Band mode. (Available tuning band mode: Air, Cable STD, Cable HRC, Cable IRC, Cable Auto.)
If sets Air, the range of channel is 2-69, and if sets Cable,the range of channel is 1-135.
Auto Ch Search
Press ▼ / ▲ button to select this item, then press ENTER/► button to enter the Auto Channel Search Program.
1. Press CH+/CH- button on the front panel or on the remote control.
Press CH+ button for the next channel
Press CH - button for the previous channel.
2. Press 0-9 buttons and -/-- button.
You can select the channel by pressing 0 to 9 buttons directly for the channel you want.
Press the -/-- button to enter a program number for digital program channel.
3. Example:
To select 1-digit channel (e.g. Channel 5): Press the 5 and ENTER button.
To select 2-digit channel (e.g. Channel 20): Press the 2 and 0 buttonts,then press ENTER button.
To select 3-digit channel (e.g. Channel 103): Press the 1 and 0 and 3 buttons,then press ENTER button.
To select a program number for multiple program channel (e.g. Channel 2-1):Press the 2 button, then press -/-- and 1
button,then press ENTER button.
Note: After select the digit button, the digit will be memorized.
Intitial Setup Menu
English
Air
Menu To Exit
Choosing a TV channel
8
Menu Operation