Powering On/Off Your Digital Video Camera; Changing Camera Mode - Vivitar DVR 945HD User Manual

Powering ON/OFF Your Digital Video Camera

Make sure the batteries have been inserted properly into your digital camera.

Make sure an SD card has been inserted into your camera.

(SDHC Class 4 card up to 32GB - SD Card not included)
Powering the camera ON
Press the Power button to turn your camera ON. The camera will be in Video Capture mode to
start.
Powering the camera OFF
While the camera is on, you can press the
OFF. You will see a "Goodbye" splash screen and then the camera will power off completely.
Note: Your digital video camera also has an Auto Power Off feature that automatically turns off your
camera after a specific period of time that your camera is left idle. The Auto Power Off time can be set
from the „Auto Power Off‟ menu settings.

Changing Camera Mode

Your camera has three main modes:
1) Video Capture Mode - Use this mode to capture videos with your camera.
2) Photo Capture Mode - Use this mode to capture photos with your camera.
3) Playback Mode (for photos and videos) - Use this mode to view the photos and videos you have
already taken with your camera.
When the camera is first powered ON, the Video Capture Mode will be active. The icons that appear
on the LCD screen are the best default settings so that you can begin to capture and enjoy clear
quality photos.
Power button again at any point to turn your camera
9