Table of Contents
Advertisement
8
www.aeg.com
long holiday period without the
formation of a bad smell.
The fridge compartment
must be empty when the
holiday function is on.
To activate the function:
• Press the temperature regulator
(warmest) until the letter H (Holiday)
appears on the temperature indicator.
The Holiday function sets the
temperature approximately +15°C.
The refrigerator is in the energy saving
set.
To switch off the function press the
fridge temperature regulator to set
required temperature.
4. FIRST USE
4.1 Cleaning the interior
Before using the appliance for the first
time, the interior and all internal
accessories should be washed with
lukewarm water and some neutral soap
to remove the typical smell of a brand-
new product, then dried thoroughly.
5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Positioning the door
shelves
To permit storage of food packages of
various sizes, the door shelves can be
placed at different heights.
1. Gradually pull the shelf in the
direction of the arrows until it comes
free.
2. Reposition as required.
3.11 DYNAMICAIR function
To switch on the function:
• Press the DYNAMICAIR button.
The DYNAMICAIR indicator is shown.
To switch off the function before its
automatic end, repeat the steps until
DYNAMICAIR indicator goes off.
If the function is activated
automatically the
DYNAMICAIR indicator is
not shown (refer to "Daily
use"). The activation of the
DYNAMICAIR function
increases the energy
consumption.
CAUTION!
Do not use detergents or
abrasive powders, as these
will damage the finish.
Advertisement
Table of Contents
