Panasonic WH-SDC03H3E5 Operating Instructions Manual page 3

Before use, make sure the system has been installed correctly by an
authorised dealer according to the given instructions.
• Panasonic Air-to-Water Heatpump is a split system, consisting of two units: indoor and outdoor units. This system
is designed to operate with Panasonic Water Tank Unit. Unless used together with the Panasonic Water Tank Unit,
Panasonic does not guarantee any normal operation nor the reliability of the system.
• These operating instructions describe how to operate the system using the indoor and outdoor units.
• As for the operation of other products such as water tank, radiator, external thermo controller, and underfl oor units, refer
to the operating instructions of each product.
• Some functions described in this manual may not be applicable to your system.
• Consult your nearest authorised dealer for further information.
*1 The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised
service partners.
*2 Only displayed when COOL mode is unlocked (This means when COOL mode is available)
System overview
Remote Controller
The illustrations in this manual are for explanation purposes only and may differ from the actual unit.
They are subject to change without notice for future improvement.
Operating conditions
Water outlet temperature (°C)
(Min. / Max.)
Outdoor ambient temperature (°C)
(Min. / Max.)
Solar Panel
Indoor Unit
Outdoor
Unit
Power Supply
HEATING *
20 / 55
-20 / 35
When the outdoor temperature is out of the
COOLING
1
range in the table, the heating capacity will
drop signifi cantly and the outdoor unit may stop
5 / 20
operating for its protection.
The unit will restart automatically after the outdoor
16 / 43
temperature returns to the specifi ed range.
Radiator
Shower
Fan Coil
Unit
Floor
Heating
Water Tank Unit
3