Yamaha GRIZZLY YFM70GDXG Owner's Manual page 126

5. Install the oil filler bolt and its gasket, and then
tighten the bolt to the specified torque.
Tightening torque:
Differential gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
To change the differential gear oil
1. Place the ATV on a level surface.
2. Place an oil pan under the differential gear
case to collect the used oil.
3. Remove the differential gear oil filler bolt, the
differential gear oil drain bolt and their gasket
to drain the oil from the differential gear case.
8
1. Differential gear oil drain bolt
2. Gasket
4. Install the drain bolt and its new gasket, and
then tighten the bolt to the specified torque.
Tightening torque:
Differential gear oil drain bolt:
9.8 Nm (0.98 m·kgf, 7.1 ft·lbf)
5. Refill with the recommended differential gear
oil to the brim of the filler hole as shown.
NOTICE: Be sure no foreign material en-
ters the differential gear case.
2
1. Differential gear oil filler bolt
1
2. Gasket
3. Differential gear oil
4. Correct oil level
8-29
[ECB00412]
1 2
3
4