Load Default; Erasing Files - Curtis MP514 User Manual

MP3 Player User's Guide
4. Press the Skip buttons to select "Rate". Press the A-B/Menu button repeatedly to cycle through
the available Recording Sampling Frequencies.
5. Press the Skip buttons to select "Exit" and press the A-B/Menu button to exit the Record
Setting menu.
Note: A higher recording sampling frequency brings better recording quantity, but takes more
memory space.
Sampling Frequency
8000 Hz
11025 Hz
16000 Hz
22050 Hz
32000 Hz
Note: The recording format options in "Encoder" are only a bit different. User need not to change
this setting.

Load default

To reset all setting to factory default setting,
1. In the settings menu, select "Load default"
2. Press the A-B/Menu button. The default settings are loaded to the MP3 Player.

Erasing files

Warning: Erased files cannot be recovered.
1. Stop playback or recording before attempting to erase files.
2. Press and hold the A-B/Menu button and release it to enter menu and select Erase Files.
3. There are two options to choose from. To erase music files, select Music. To erase voice
recordings, select Voice.
4. You will be asked if you are sure you want to erase the listed music file or voice memo.
file://C:\Documents and Settings\fay\桌面\MP514-STMP3505\English\gu...
Maximum Recording Time per 128MB
8 hours
5.8 hours
4 hours
2.9 hours
2 hours
页码，9/13
2007-5-11