Table of Contents
Advertisement
1) Locate the SD card slot to the left of the battery compartment.
2) Insert the SD memory card correctly in the direction shown.
3) Press the memory card until you hear a "Click" sound.
Note: After you insert an SD memory card, the SD card icon will appear on the top right of the LCD,
indicating that your SD memory card has been installed successfully. The media you capture will now
be stored on the card and not in the internal memory.
This product supports SD cards of up to 16GB.
Make sure that the card is not locked. Locked cards do not allow images to transfer to the card.
Formatting will delete all data on the SD Memory Card.
Download all the media to your computer before you format the card.
Do not remove the SD Memory Card during formatting as this may damage the card and render it
unusable.
Before using the camcorder, be sure to format the card with the camcorder (see the Format section
further on in the manual for instruction on how to format the card).
Closing the Battery Door
After correctly inserting the battery and SD card, clean and make sure no dirt is sticking on the Rubber
Seal before you close the battery door.
Press down on the four lines that appear next to the battery cover lever as shown in the diagram
below.
When you hear a "click" the battery door is now closed properly.
(A)
(B)
10
Advertisement
Table of Contents
