Before Using Your Washing Machine For The First Time - Bosch wfo 2460 Instruction Manual And Installation Instructions

Before Using Your Washing
Machine For the First Time
Preparing your
washing machine
10
Caution
The washing machine must have been installed and
connected properly (refer to Page 42).
Your appliance was tested before leaving the factory.
To remove any water left over from testing proce
dures, the first washing cycle should be carried out
without laundry in the machine.
q Do not load any laundry.
q Turn on water tap.
q Pull out the detergent dispenser up to the end
stop.
q Pour approx. 1 litre / 1 ¾ pt of water into chamber
II of the detergent dispenser.
q Half fill the measuring beaker with detergent and
pour into chamber II.
i Do not use any special detergents for delicates or
woollens (excessive foam).
q Close the detergent dispenser.
q Close the loading door.
q Set the programme selector to "90 C
Cottons+Linens".
The "Ready" indicator light is on.
The "Ready in" time appears in the display.
q Press the "Start" button.
The programme starts.
The "Wash" indicator light is on.