Advertisement
Available languages
Available languages
2.2 Interfaces and Connections: for camera with connection of alarm infant, RS485 TF card
- Connections of the external ports:
HP: Connect to headphone.
MIC: Connect to microphone.
DC12V: Power supply port.
LAN: Network port. It supports PoE power supply.
Alarm NO/COM: Alarm output. Conect to alarm output devices.
Alarm GND: Connect to external sensor together with the alarm in line.
Alarm IN: Connect to alarm input devices, like senor, together with alarm GND line.
RS485: Connect to keyboard or speed doom.
- Connections of the internal ports
You shall take down the back box of the device if you want to see the above ports.
Link: Network indicator.
RESET: Reset hole. Hold and press the spring blade in this hole with spicule to reset the settings to the factory default settings.
TF: Insert TF card.
DCIN/CVBS: Connect to a 3 pin joint which has a power supply port and a CVBS port in the other end. You can connect to
monitor for video adjustment.
3 Installation
3.1 Connect IP-CAMERA to Network
The connection of IP-CAM is shown below:
User can connect the PC and IP-CAMERA in accordance with the above picture. Before connecting, please connect external
devices, and then connect the power.
EN
LAN
Switch
LAN
Modem
Internet
HP
HP
HP
MIC
MIC
MIC
Power supply
Alimentazione
LAN
Switch
LAN
Switch
LAN
LAN
Modem
Internet
Modem
Alm_COM
Alm_NO
Alm_IN
Allarme
Sensore
Alm_GND
RS485+
RS485-
HP
PTZ
MIC
Alimentazione
HP
Switch
LAN
MIC
Modem
Alimentazione
Alm_COM
Alm_NO
LAN
Alm_IN
Switch
Allarme
LAN
Alm_GND
Modem
Internet
RS485+
RS485-
Alm_COM
Alm_NO
Alm_IN
Allarme
Sensore
Alm_GND
PTZ
RS485+
RS485-
PTZ
Tastiera
HP
MIC
Power supply
Alimentazione
Switch
LAN
Modem
Alm_COM
Alm_NO
Alm_IN
Alarm
Allarme
Alm_GND
RS485+
RS485-
PTZ
LAN
Internet
LAN
Internet
Sensore
LAN
Internet
Sensor
Sensore
Keyboard
Tastiera
7
Advertisement
