Four-Faith f7946 series User Manual page 34

Enter relewant bridge IP address and subnet mask, click 'Add' to create a bridge.
Note: Only create a bride can apply it.
Assign to Bridge option: to assign different ports to created bridge. For example: assign port
(wireless port) is ra0 in br1 bridge as below:
Prio means priority level: work if multiple ports are within the same bridge. The smaller the
number, the higher the level. Click 'Add' to take it effect.
Note: corresponding interface of WAN ports interface should not be binding, this bridge
function is basically used for LAN port, and should not be binding with WAN port
If bind success, bridge binding list in the list of current bridging table is as below:
To make br1 bridge has the same function with DHCP assigned address, users need to set
multiple DHCP function, see the introduction of multi-channel DHCPD:
Xiamen Four-Faith Communication Technology Co.,Ltd.
Add： J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China
http：//www.fourfaith.com Tel： +86 592-6300466 6300465 6300464
F3946 Series Router User Manual
Page 34 of 82
Fax：+86 592-5912735