Four-Faith F3946-W/W User Manual page 26

This function is used to detect whether the Internet connection is active, if users set it and when
the router detect the connection is inactive, it will redial to users' ISP immediately to make the
connection active.
Detection Method:
None: do not set this function
Ping: Send ping packet to detect the connection, when choose this method, users should also
configure "Detection Interval", "Primary Detection Server IP" and "Backup Detection
Server IP" items.
Route: Detect connection with route method, when choose this method, users should also
configure "Detection Interval", "Primary Detection Server IP" and "Backup Detection
Server IP" items.
PPP: Detect connection with PPP method, when choose this method, users should also
configure "Detection Interval" item.
Detection Interval: time interval between two detections, unit is second
Primary Detection Server IP: the server used to response the router's detection packet. This item
is only valid for method "Ping" and "Route".
Backup Detection Server IP: the server used to response the router's detection packet. This item
is valid for method "Ping" and "Route".
Note: When users choose the "Route" or "Ping" method, it's quite important to make sure
that the "Primary Detection Server IP" and "Backup Detection Server IP" are usable and stable,
because they have to response the detection packet frequently.
Force reconnect: this option schedules the pppoe or 3G reconnection by killing the pppd daemon
and restart it.
Time: needed time to reconnect
Enable Dial Failure to Restart: If the dial failure will be in the default time to restart
STP
Xiamen Four-Faith Communication Technology Co.,Ltd.
Add： J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China
http：//www.fourfaith.com Tel： +86 592-6300466 6300465 6300464
F3946 Series Router User Manual
Page 26 of 88
Fax：+86 592-5912735