Safety Precautions Contents Precautions Safety Precautions .........1 Note: Panel Controls ..........2 • Use only in a 12-volt DC negative-ground • Playing a defective or dusty disc can cause Remote Controls......... 3-4 electrical system. dropouts in sound. General Operation ........4-5 • When replacing the fuse, be sure to use one • Hold discs as illustrated. iPhone Operation..........6 with an identical amperage rating. Using • Do not touch the unlabeled side.
Panel Controls Power on/off: Press to turn on/off the unit. 1. Disc eject - Hang up the call - Press to tune in a preset station. 2. - Power on/off (press more than 2 seconds) - Hold for more than 2 seconds to store station. 7. SD/MMC card slot ( located behind the front - Mute panel ) 10. Radio local/distant 3. - To fast search within a track/skip to next or 8. - Short press to switch to clock display, 11. AUX IN previous track press again to exit. 12. USB connector - Track seek 13.
Remote Controls Power on/off: Press to turn on/ 1. Zoom (DVD/VCD only) 22. - DVD audio 2. Title (DVD only) - VCD audio L/R/ST off the unit. 3. Power on/off 23. - Short press to switch to clock display, 4. Setup press again to exit. 5. Menu cursor - Long press to enter clock setting. 6. Enter - Return to previous menu (Setting menu) 7. Program 24. - Angle (DVD only) 8.
General Operation Remote Controls Switching on and off Audio Setting Remote control operating range 1. Press to turn on the unit. Press the VOL knob to select audio setting, The remote control can operate within a and rotate the knob to adjust. distance of 3~5m. 2. Press SRC once or more to select your desired function: Aux ( Aux-in), I-MODE, BT MUSIC, Tuner (Radio), DISC, USB, CARD.
Page 6
General Operation Menu Setting - 12 /24 HOURS Mode Press the VOL knob more than 2 seconds 12 HOURS MODE: to enter into menu mode, then each press The clock displays in the type of 12 hours such changes the mode. as 11:18 AM.
iPhone Operation Accessing iPhone mode Press the SRC button on the front panel or remote control to switch to the I-MODE source. Audio Pausing play Press the [ 1 ] button on the front panel or the [ ] button on the remote control to pause play. Selecting a track Track-up 1. Press the [ ] button to move to the beginning of the next track.
Radio Mode Selecting a Band Preset Mode Press BAND once or more to select FM1 - Six numbered preset buttons store and recall FM2 - FM3 - AM1 - AM2. stations for each band. The stored stations Display shows wave band, frequency, and (1-6) for the current band can be viewed on preset station number if already stored.
USB/SD/MMC/MP3 Mode Disc Mode Loading SD/MMC Card Accessing Disc Mode Insert the SD/MMC card into the slot. If a disc is already in the disc slot but is not T he unit will play the music automatically and the LCD will show playing, press the SRC button on the front CARD.
Disc Mode Insert a Disc Disc and File NOT Supported 3. For VCD/CD, VCD or CD icon will appear on the display. *.AAC, *.DLF, *.M3U, *.PLS, MP3 PRO files Insert the disc into the slot, and the unit will 4. W hile MP3/WMA files playback, MP3/WMA and files with DRM.
Page 11
Disc Mode Entering File and Folder Names which MP3/WMA files are to be played by Note: assigning file names beginning with play Names using the code list characters are the MP3 and WMA (Windows Media Audio) music sequence numbers such as "01" to "99". For only file names and folder names that can files are digital audio files that are compressed example, a medium with the following folder/ be entered and displayed.
During talking, press devices. from the unit to your mobile phone. 3. After the name of the Bluetooth module “BETTER” appears on the pairing list of your Note: mobile phone, select it. At this time, a pairing code is required. Enter the pairing code Some mobile phones will transfer audio from (“1234” by default) and the Bluetooth pairing...
Page 13
Bluetooth Mode Auto Connect Music Mode such as PHILIPS, when it playbacks A2DP, you must find the unit “BLUETOOTH” in Press the knob to enter main menu, and select A2DP the phone’s menu and reconnect (check [AUTO ON] or [AUTO OFF] in the menu. A2DP is short for Advanced Audio Distribution your mobile phone whether has the A2DP & AUTO OFF: After paired OK, if the distance Profile.
Track Playback 2. Press RDM again to select normal playback. Display shows A B CANCEL. Select Desired Track - Press to skip to the next track. - Use 1-9 and 0, 10+ buttons on the remote control to select desired track number. Repeat During playback, press REPEAT or RPT once Fast Forward/Backward During Pause or more.
Page 15
Track Playback GOTO DVD Subtitle Select PROGRAM Goto desired track/chapter or time point Press SUB.T to select the subtitle language directly. to show if the DVD has multiple language Press GOTO button on the remote control, subtitles. track or DVD Title/Chapter and time display on top of the screen.
DVD Setup Press SETUP to display setup menu on the - PASSWORD - DEFAULT: RESTORE screen. 1. Press number button " 0000 " on the remote If this item is selected, the unit will return to to select setup items: control, then press the ENTER button to original setting.
Page 17
DVD Setup DVD Video Setup You can change the language by pressing [AUDIO] key of the remote controller. to select and to confirm. ENTER - SUBTITLE LANG Select one language that you are familiar with to display DVD subtitles. If the DVD disc has the subtitle file in the selected language, the subtitle will be displayed in the selected language.
Anti-Theft System This unit is equipped with a flip-down detachable Installing the Panel panel. 1. Hold the panel and ensure the panel faces Panel can be detached and taken with you, toward you, and set the right side of the helping to deter theft. panel in the panel bracket. 2. Press the left side of the panel until it locks. Removing the Panel 1. Switch off the power of the unit.
Installation Guide Installation Procedures Important: Remove these two screws before installation. Otherwise, the player will not work. First complete the electrical connections, and then check for correctness. Reset Mounting bolt Press button to flip down the panel. Then rubber cushion press the RESET button with a pointed object to reset the unit to the original status. Transport Note: Press the RESET button will erase the screws clock and stored stations.
Troubleshooting Sound skips due to vibration. If you suspect something is wrong, immediately switch power off. Immediately stop using it and Mounting angle is over 30 call the store where you purchased it. Adjust mounting angle to less than 30 Never try to repair the unit yourself because it Unstable mounting. is dangerous to do so. Mount the unit securely with the mounting parts. General Radio No power or no sound. Noise in broadcasts.
Specifications General AM Radio Components Frequency range 530-1710KHz Power supply 12V DC (11V-16V) Mounting collar Usable sensitivity 30dBμ Test voltage 14.4V, Machine screws M5x6 mm (S/N=20dB) negative ground Mounting bolt (50 mm) Maximum power output 50Wx4 channels Removable face plate case Continuous power 20Wx4 channels (4 Trim plate Disc Player output 10% T.H.D.) Removal key Max. current consumption Operating instructions System Disc digital Suitable speaker 4-8ohm Rubber cushion audio system...
Page 23
CLASS 1 LASER PRODUCT P.N.: 127075015556...
Need help?
Do you have a question about the BT0323 and is the answer not in the manual?
Questions and answers
Cómo sincronizar a los mandos de volante al radio bt0324