Sencor SLE3217TC User Manual
  1. Manuals
  2. Brands
  3. Sencor Manuals
  4. Led television
  5. SLE3217TC
  6. User manual

Sencor SLE3217TC User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LED Television
USER'S MANUAL
EN
SLE3217TC

Advertisement

Table of Contents
loading

Summary of Contents for Sencor SLE3217TC

  • Page 1 LED Television USER'S MANUAL SLE3217TC...

  • Page 3: Table Of Contents

    Content CAREFULLY READ THIS USER’S MANUAL BEFORE PUTTING THE TELEVISION INTO OPERATION. KEEP IT FOR FUTURE USE. RECORD THE MODEL NUMBER AND THE SERIAL NUMBER OF THE TELEVISION. SEE THE LABEL ON THE REAR COVER AND PROVIDE THIS INFORMATION TO YOUR VENDOR IN THE EVENT THAT YOU REQUIRE REPAIRS.

  • Page 4: Important Safety Instructions

    Important safety instructions 1. Important safety instructions If you want to use this product correctly, carefully read this user’s manual and store it for future reference. If you give (sell) the appliance to somebody, please also include all the documentation together with this appliance, including this user’s manual. To reduce the risk of injury by electrical shock do not remove the cover (or the...
  • Page 5 Important safety instructions Installation, operation – Install the appliance according to the instructions in the user’s manual. – Leave free space on all sides of the appliance necessary for proper air circulation. This removes the heat created during operation. Covering the ventilation openings of the appliance’s case creates a risk of overheating or damaging the appliance.
  • Page 6 Important safety instructions – Before turning on the appliance, check that the electrical connection is performed properly and in accordance with the instructions of the manufacturer. Before connecting or changing the connection, turn off the appliance and disconnect it from the mains.
  • Page 7 Important safety instructions Note: Only connect the appliance to a properly grounded socket with a protective grounding pin. Note: If you will be installing the appliance on a wall or to the ceiling, follow the manufacturer’s instruction found in the user’s manual of the particular appliance. Repairs and maintenance –...
  • Page 8 Important safety instructions Remote control and batteries – Do not expose the remote control or the batteries to direct sunlight or sources of heat, such as heaters, heat exchangers, stoves or other appliances (including amplifi ers) that produce heat. Do not use or leave the appliance in the vicinity of an open fi re. –...
  • Page 9 Important safety instructions Supplement to the LCD TV user's manual Measures to take when a static image is displayed; red/blue/green pixels on the screen A static image can permanently damage the display part of the television – Do not leave a static image on an LCD screen for longer than 2 hours, because this could damage the screen.
  • Page 10 Important safety instructions Notes on the USB connector: – USB memory devices must be inserted into the appliance directly. To prevent data transmission failure or its interference, do not use USB extension cables. Electrostatic discharges may cause the appliance to malfunction. In such an event the user must restart the appliance.

  • Page 11: Stand Assembly

    Stand assembly 2. Stand assembly Before attaching/detaching the stand, ensure the television is switched off and unplugged from the power outlet. Before performing work spread cushioning (e.g. soft blanket) over the base area to lay the LED TV on this will prevent it from being damaged. Make sure the stand is properly assembled so that the TV would be stable.

  • Page 12: Device Description

    Device description 3. Device description 3.1. Control panel button function The buttons on the lower-right panel control your TV´s basic features, including the on-screen menu. To use the more advanced features, you should use the remote control. Note: Pictures are only for illustration. ...

  • Page 13: Remote Control

    Remote control 4. Remote control POWER  button Turns the television on/from the stand-by mode. INPUT button Press to select the desired input. NICAM button NICAM/A2 input or output. ASPECT button Page aspect ratio selection, e.g. 16:9, Zoom, Auto, 4:3. 5.
  • Page 14 Remote control 15. ////ENTER buttons Used to navigate in a menu on the screen and to set up the TV according to your preferences. ENTER button Used to enter/exit the channel list menu (DTV/ATV only). 16. MENU button It displays TV main menu in TV mode. 17.
  • Page 15 Remote control 30. AUDIO button DTV/MEDIO mode: select a background sound if available. ATV mode: select a sound mode: Stereo / Dual I/II / Mono. Other sources: select left/right channel 31. SUBTITLE button Press to show/hide subtitles in the bottom part of the screen, if they are available. 32.

  • Page 16: First Time Setup

    First time setup 5. First time setup Press INPUT button to display the input source list. Press  /  or OK button to select the desired input source. Press OK button to enter the input source. Press EXIT button to quit. Connect an RF cable from the Tv’s input called “RF-In”...

  • Page 17: Surrounding

    First time setup 5.3. Surrounding Choose between Home (Home/Off) or Shop (Shop/On). Note: Using of Shop, the system will set some parameters of the device to the highest settings to present the device in a surrounding with extreme lightning, accompanying by higher ballast and consumption.
  • Page 18 First time setup Note: If an automatic tuning do not fi nd any receivable channel (e.g. inconvenient antenna) or you have paused it manually, you can still tune channels manually, one by one, as it is described down in the manual. To do so, you will need some technical data about channel you wish to tune, such as broadcast way, frequency, audio modes, broadcast speed etc.

  • Page 19: Menu

    Menu 6. Menu 6.1. Channel menu Press MENU button to display the main menu. Press  /  button to select CHANNEL in the main menu. Press  /  button to select the option that you want to adjust in the CHANNEL menu. Press Enter button to adjust.
  • Page 20 Menu 6.1.2. ATV manual tuning Current CH Set the channel number. Color System Select the color system (available systems: AUTO, PAL, SECAM). Sound System Select the sound system. Fine-Tune Adjust the frequency of the channel fi nely. Search Start searching channel. 18 EN 06/2016 2016...
  • Page 21 Menu 6.1.3. DTV manual tuning Press  /  button to select DTV Manual Tuning, then press Enter button to enter sub-menu. Press  /  button to select channel, then press Enter button to search program. 6.1.4. Program Edit Press ...
  • Page 22 Menu 6.1.5. Schedule list You can program certain events fi xed in time in digital broadcasting. Such planned (programmed) events are saved in the List. Press  /  button to select Schedule List, then press Enter button to enter sub-menu. It is available in source.

  • Page 23: Picture Menu

    Menu 6.1.6. Signal information Press  /  button to select Signal Information, press the Enter button to see the detail information about the signal. Only available when there is signal in DTV. Use programs/channels with the highest values of both variables, max. is 100 for a satisfactory reception.
  • Page 24 Menu 6.2.1. Picture mode Press  /  button to select Picture Mode, then press OK button to enter sub-menu. You can change the value of contrast, brightness, color, sharpness and tint when the picture is in Personal mode. Tip: You can press PMODE button to change the Picture Mode directly.
  • Page 25 Menu Increase the blue tone for the white. Cold Increase the sex-linked colors for the white. Normal Increase the red color for the white. Warm 6.2.3. Noise Reduction To fi lter out and reduces the image noise and improve picture quality. Press ...

  • Page 26: Sound Menu

    Menu 6.3. Sound menu Press MENU button to display the main menu. Press  /  button to select SOUND in the main menu. Press  /  button to select the option that you want to adjust in the SOUND menu. Press Enter button to adjust.
  • Page 27 Menu Tip: You can press SMODE button on the remote control to change the Sound Mode directly. Standard Produces a balanced sound in all environments. Preserves the original sound. Good for musical programs. Music Enhances treble and bass for a rich sound experience. Movie Enhances vocals for sports.

  • Page 28: Time Menu

    Menu 6.4. Time menu Press MENU button to display the main menu. Press  /  button to select TIME in the main menu. Press  /  button to select the option that you want to adjust in the TIME menu. Press Enter button to adjust.
  • Page 29 Menu 6.4.2. Sleep timer Press  /  button to select Sleep Timer, then press Enter button to enter sub-menu. Press  /  button to select. (Available options are:Off,10min,20min,30min,60min, 90min,120min,180min,240min). 6.4.3. Auto standby Press  /  button to select Auto Standby, then press Enter button to enter sub-menu. Press ...

  • Page 30: Lock Menu

    Menu 6.4.4. OSD timer Press  /  button to select OSD Timer, then press Enter button to enter sub-menu. Press  /  button to select how long the setting will be displayed before automatic shut off. 6.5. Lock menu Press MENU button to display the main menu.
  • Page 31 Menu 6.5.1. Lock system Press  /  button to select Lock System, then press Enter button to make the following 3 options valid. 6.5.2. Set password Press  /  button to select Set Password, then press Enter button to enter sub-menu to set new password.
  • Page 32 Menu 6.5.3. Channel lock Press  /  button to select Channel Lock, then press Enter button to enter sub-menu to select. Press button to lock or unlock the channel. Green 6.5.4. Parental Guidance Press  /  button to select Parental Guidance, then press Enter button to enter sub- menu to select the number of age which is suitable for your children.

  • Page 33: Hotel Mode

    Menu 6.5.5. Key lock Press  /  button to select Key Lock, then press  /  button to select Off or On. When Key Lock’s statue is on, you can’t use the Key panel button. 6.6. Hotel mode Hotel mode serves to limit the TV functions for easier usage in place where for example maximum volume or tuning should be limited.

  • Page 34: Setup Menu

    Menu 6.6.4. Max volume Press  /  button to select Max Volume, then press  /  button to adjust. 6.6.5. Clear lock Press  /  button to select Clear Lock, then press Enter button to clear the setting you have done before.
  • Page 35 Menu 6.7.2. TT language Press  /  button to select TT Language, then press Enter button to enter sub-menu. Press  /  /  /  button to select TT language. 6.7.3. Audio Languages Press  /  button to select Audio Languages, then press Enter button to enter sub- menu.
  • Page 36 Menu 6.7.4. Subtitle Language Press  /  button to select Subtitle Language, then press Enter button to enter sub- menu. It serves to automatically select a certain language if this is available. You can select 2 languages – fi rst and second. If the desired language is not available, the system will select a language of the broadcaster.
  • Page 37 Menu WARNING Formatting will delete all data on the memory stick! Note: Firstly try each USB device for speed and record reliability. In case of unsatisfactory result, change it to other one, particularly faster. USB device speed is a key parameter of a reliable record and time shift.
  • Page 38 Menu 6.7.11. Software Update (USB) Press  /  button to select Software Update (USB), plug your USB device in the USB slot, then press Enter button to update the right software. WARNING Run the software update only if you have an original software to the correct model from the manufacturer including the changes description.

  • Page 39: Screen Menu (Only Pc Mode)

    Menu Auto Standby Press  /  button to turn the Auto Standby on or off. Device List Press Enter button to open the main menu of device. 6.8. Screen menu (only PC mode) Press MENU button to display the main menu. Press ...
  • Page 40 Menu 6.8.3. V-Offset Adjust the vertical position of the picture. Press  /  button to select V-Offset, then press Enter button to enter sub-menu 6.8.4. Size Adjust the display size. Press  /  button to select Size, then press Enter button to enter sub-menu. 6.8.5.

  • Page 41: Usb

    7. USB Note: Before operating Media menu, plug in USB device,then press INPUT button to set the Input Source to Media . TV will recognise majority of USB devices and it will shortly show the menu for playback. If there is no action, menu disappears and the previous mode will be on.

  • Page 42: Photo Menu

    7.1. Photo menu Press  /  button to select PHOTO in the main menu, then press Enter button to enter. Press Exit button to return to the previous menu and exit menu to quit. Press  /  button to select the fi le you want to watch in the fi le selecting menu, then press ENTER button to display picture.

  • Page 43: Music Menu

    7.2. Music menu Press  /  button to select MUSIC in the main menu, then press Enter button to enter. Press Exit button to return to the previous menu and exit menu to quit. Press  /  button to select drive disk you want to watch, then press Enter button to enter.

  • Page 44: Movie Menu

    7.3. Movie menu Press  /  button to select MOVIE in the main menu, then press Enter button to enter. Press Exit button to return to the previous menu and exit menu to quit. Press  /  button to select drive disk you want to watch, then press Enter button to enter.

  • Page 45: Text Menu

    7.4. Text menu Press  /  button to select TEXT in the main menu, then press Enter button to enter. Press Exit button to return to the previous menu and exit menu to quit Press  /  button to select drive disk you want to watch, then press Enter button to enter.

  • Page 46: Trouble Shooting Guide

    Trouble shooting guide 8. Trouble shooting guide WARNING Under no circumstances should you try to repair the device yourself, the device does not contain any parts that a user could repair himself. Always take the device to the authorised service centre in case of repair, adjustment or any other maintenance.
  • Page 47 Trouble shooting guide Symptoms Possible solutions No response to remote control Batteries of remote control may have exhausted, if necessary, change the batteries. Clean the remote control lens. The distance between LED TV and remote control should be within 8m, within recommended operating angle and path is fee of obstructions.
  • Page 48 Trouble shooting guide Symptoms Possible solutions Picture is distorted, macroblock, Compression of video contents may cause distortion small block, dots, pixelization, especially on fast moving pictures such as sports and etc. action movies. Noise from speakers Check cable connections, make sure a video cable is not connected to an audio input.

  • Page 49: Technical Specifications

    Technical specifi cations 9. Technical specifications Model SLE 3217TC Panel size 32" Consumption Standby power consumption <0.5 W Nominal voltage AC 110-240V Remote control Included VESA wall mount 200 x 100 Dimensions with stand (W × H × D) 737 x 212 x 476 mm Dimensions w/o stand (W ×...
  • Page 50 Technical specifi cations Audio system BG/DK/I, L/L /MPEG-1 layer 1/2, DD, DD+, AAC, HE-AAC Stereo sound NICAM/A2 Sound output Headphone jack PVR recording to USB Pitch correction Progressive Scan Timeshift function Electronic Programme Guide EPG Teletext Teletext pages 1000 Comb fi lter OSD menu Zoom Noise reduction...
  • Page 51 Technical specifi cations Information sheet Importer: FAST ČR, a.s., Černokostelecká 1621, 251 01 Říčany Brand Sencor Model SLE 3217TC Energy effi ciency class Screen diagonal in cm/inches [cm/"] 81/32 Electric energy consumption when on [W] Annual electric energy consumption* [kWh] Electric energy consumption in standby mode [W] ≤0.5W...
  • Page 52 INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of packaging material at a public waste disposal site. DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical &...
  • Page 53 Cases when the claiming product cannot be indentified according to the presented documents (e.g. the serial number or the warranty seal has been damaged). Authorized service centers Visit www.sencor.eu for detailed information about authorized service centers. EN 51 06/2016 2016...
  • Page 54 ® Designed in Europe by Sencor , Made in China...

Table of Contents