Parking Brake - Toro 74180 Operator's Manual

Parking Brake

Always set the parking brake when you stop the
machine or leave it unattended.
Setting the Parking Brake
1. Move the motion control levers to neutral
(Fig. 1).
2. Pull up on the parking brake lever to set the
parking brake (Fig. 2). The parking brake lever
should stay firmly in the "SET" position.
Releasing the Parking Brake
1. Push in on the button and lower parking brake
lever to "OFF" (Fig. 2).
1
Figure 2
1. Parking brake–SET
2. Button
2
3
m–3287
3. Parking brake-OFF
Operation
13