Table of Contents
Advertisement
General
Model name
Type
Screen size
Aspect ratio
Horizontal/vertical frequency
(computer signal)
Compliant video signal format
Format
Audio output
Operating conditions
Power requirements
Rated current
External dimensions
(excluding protruding parts)
Weight
Accessories
LCD panel
T
p y
e
e
Number of pixels displayed
Number of colors displayed
Viewing angle (TYP.)
Brightness (TYP.)
Contrast ratio (TYP.)
Input/output terminals
CVBS
HDMI
VGA
YPbPr
E. AUDIO 3G/ HD/SD SDI
E. AUDIO 3G/ HD/SD SDI
AUDIO (IN)
AUDIO (MONITOR OUT)
GPI (MAKE)
UMD (RS-485)
UMD (RS-232C)
DT-N24F
Multi format LCD monitor
Type 23.8 wide format
16:9
H:
64 kHz – 83 kHz
V:
50 Hz – 75 Hz
* Some signals within this frequency range may not be displayed
"Available signals" on page 21
3G SDI:
SMPTE-425M-A/B
HD SDI:
BTA S-004C, SMPTE292M, SMPTE-425M-A/B, SMPTE-274M, SMPTE-RP211, SMPTE-296M
SD SDI:
SMPTE-125M, ITU-R BT.656
2K:
SMPTE ST 2048-1: 2011
EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Internal speaker: 2.5W+2.5W(8 )
Operating temperature: 0°C – 40°C (41°F – 95°F)
Operating humidity: 20% – 80% (non-condensing)
(Slightly variable depending on ambient conditions for installation.)
AC 120 V / AC 220 – 240 V, 50 Hz/60 Hz; DC11～17V
1.5A (AC 100V～240V)
3.0A (DC11～17V)
with the stand
Width:
575.8 mm (22 1/2˝)
Height: 405.4 mm (16˝)
Depth: 135 mm (5 1/4˝)
7.2 kg(15.9 lbs) (with the stand)
AC power cord x 1
23.8˝ wide, active matrix TFT
Width: 527.04 mm (20 3/4˝)
Height: 296.46 mm (11 11/16˝)
Diagonal: 604.7 mm (23 13/16˝)
1920 x 1080
16.70 million
178° (Horizontally), 178° (Vertically)
250 cd/m
2
1000:1
Input/output of composite signal: 1 line, BNC connector x 2, 1 V (p-p), 75
* The input (IN) and output (OUT) terminals
HDMI connector x 2(IN and OUT)
1 Line, mini D-SUB 15pin x1(IN)
Y: 1 V(p-p), 75 (with sync)
Pb : 0.7 V (p-p), 75
Pr: 0.7 V (p-p), 75
Digital signal input (compatible with EMBEDDED AUDIO signals): auto detection, 2 line, BNC connector x 2
Digital signal output (compatible with EMBEDDED AUDIO signals): auto detection, 2 line, BNC connector x 2
Analog audio signal input: 1 line, RCA connector x 2, 500 mV (rms), high impedance
Speaker: 2.5W+2.5W(8 )
3.5mm phone
"Using the GPI control" on page 17.
"Using the UMD control" on page 17.
without the stand
575.8mm (22 1/2˝)
386.9 mm (15 1/4˝)
86 mm (3 1/4˝)
19
Advertisement
Table of Contents
