Faber TRATIS36SS600-B Installation Instructions Manual page 13

12
Screw the 2 screws 12f half way into the holes provided in the sides of the bottom of the frame.
Remove the grease filters from the hood canopy.
Remove any activated charcoal filters.
Lift the hood canopy and engage the screws 12f in the slots as far as they will go.
Attachment of Hood Canopy
Working from below, fix the
hood canopy to the frame
where indicated, using the 4
screws 12q and 4 washers 22
provided, then tighten all the
screws securely.
13