Vonets VAP11N Quick Setting Manual

Vonets VAP11N Quick Setting Manual

300m professional mini wifi bridge wifi repeater

Advertisement

VONETS——VAP11N
300M WiFi Repeater WiFi Bridge
300M Professional Mini
WiFi Bridge
WiFi Repeater
VAP11N
Quick Setting Guide
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VAP11N and is the answer not in the manual?

Questions and answers

Summary of Contents for Vonets VAP11N

  • Page 1 VONETS——VAP11N 300M WiFi Repeater WiFi Bridge 300M Professional Mini WiFi Bridge WiFi Repeater VAP11N Quick Setting Guide...
  • Page 2 Can’t do commodity distribution for any commercial or profitable purposes by any ways (electricity, mechanical, photoprint, record or other methods). VONETS is the registered trademark of Shenzhen HouTian Network Communication Technology Co., Ltd. The other all trademarks or registered trademarks mentioned in this documents are belong to the individual owners.
  • Page 3 It is mainly used for expansion of wireless network signal and area coverage to make sure the smooth running of home wireless network. Intelligent WiFi Bridge mode(VAP11N): WiFi intelligent bridge function, wireless to wired, wired to wireless intelligent switching.
  • Page 4  The default WiFi password is 12345678  If you configure VAP11N by computer, please set computer IP address to obtain an IP address automatically, please see the words in the red circle of the following picture: Remark: 1) If users wireless connect VAP11N by computer, please disable the Local Area Connection and other adapters.
  • Page 5 SSID broadcast around, please see the following: 4. Choose a correct WiFi signal, then click Next, the following interface will appear: 5. Enter the correct password of the wifi hotspot that VAP11N connected, confirm it is correct one, then click Apply button.
  • Page 6 VONETS——VAP11N 300M WiFi Repeater WiFi Bridge 6. After click Apply button, the above prompt will appear, after saved the configuration parameters successfully, in ensuring the correct password, please restart the device. Remark: 1) After configured successfully, the WiFi name of the device is source WiFi name_the last two character of Mac address, the password, encryption method and channel and some other parameters are the same as source hotspot, user can change SSID (hotspot name) and password in WiFi repeater option.

Table of Contents